AC10019
Baby Changing Table
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
USA office: Fontana GBR office: Ipswich AUS office: Truganina
If you're having difficulty, our friendly
customer team is always here to help.
AUS:cs.au@costway.com
GBR:cs.uk@costway.com
Danger! Keep all small parts and packaging materials for this product
away from babies and children, otherwise they may pose a choking
hazard.
The product must be installed and used under the supervision of an
adult.
Read through each step carefully and follow the proper order.
Remove all packaging, separate and count all parts and hardware
before installation.
Please ensure that all parts are correctly installed, incorrect installation
can lead to a danger.
We recommend that, where possible, all items are assembled near the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
Ensure a secure surface during installation, and always place the
product on a flat, steady and stable surface.
Before You Start
Please read all instructions carefully and keep it for future reference.
General Warnings
02 03
Danger! Keep all small parts and packaging materials for this product
away from babies and children, otherwise they may pose a choking
hazard.
The product must be installed and used under the supervision of an
adult.
Read through each step carefully and follow the proper order.
Remove all packaging, separate and count all parts and hardware
before installation.
Please ensure that all parts are correctly installed, incorrect installation
can lead to a danger.
We recommend that, where possible, all items are assembled near the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
Ensure a secure surface during installation, and always place the
product on a flat, steady and stable surface.
Before You Start
Please read all instructions carefully and keep it for future reference.
General Warnings
02 03
1
2
Connect parts A and B, with the holes in part A facing downwards.
Attach part C with wooden dowels Q. Then fix
part C with screws P from underneath part A.
04 05
1
2
Connect parts A and B, with the holes in part A facing downwards.
Attach part C with wooden dowels Q. Then fix
part C with screws P from underneath part A.
04 05
5
6
3
4
Attach part D, with the slot in part D at the back.
Attach part E with wooden dowels Q, then fix part E with screw P from the
outside of part E and underneath of part A.
Attach part F, with the slot in part F facing downwards.
Push parts H, G into the part E along the slots of F, D and B.
06 07
5
6
3
4
Attach part D, with the slot in part D at the back.
Attach part E with wooden dowels Q, then fix part E with screw P from the
outside of part E and underneath of part A.
Attach part F, with the slot in part F facing downwards.
Push parts H, G into the part E along the slots of F, D and B.
06 07
9
10
7
8
Connect the other part E with the wooden dowels
Q and screws P.
Attach part J, with the holes in part J facing upwards.
Turn the product upside down, and screw the feet N.Attach part I, with the holes in part I facing downwards.
08 09
9
10
7
8
Connect the other part E with the wooden dowels
Q and screws P.
Attach part J, with the holes in part J facing upwards.
Turn the product upside down, and screw the feet N.Attach part I, with the holes in part I facing downwards.
08 09
13
14
11
12
Connect parts M and L with screws P. M has pre-set S holes position in the
middle of the inner side underneath.
Once parts K, L, M are connected, place it on part J, and connect M with
screws O from underneath I through the two holes in part J.
Connect part K, with the holes in part K facing outwards, make the upper
opening of K,L,M flush.
Fix part K with screws P.
10 11
13
14
11
12
Connect parts M and L with screws P. M has pre-set S holes position in the
middle of the inner side underneath.
Once parts K, L, M are connected, place it on part J, and connect M with
screws O from underneath I through the two holes in part J.
Connect part K, with the holes in part K facing outwards, make the upper
opening of K,L,M flush.
Fix part K with screws P.
10 11
In case a return is required, the item must be returned in original
box. Without this your return will not be accepted.
DO NOT discard the box / original packaging.
Take a photo of the box markings.
Take a photo of the damaged part (if applicable).
Send us an email with the images requested.
A photo of the markings (text) on the side of the box is required in
case a part is needed for replacement. This helps our staff identify
your product number to ensure you receive the correct parts.
A photo of the damage is always required to file a claim and get
your replacement or refund processed quickly. Please make sure
you have the box even if it is damaged.
Email us directly from marketplace where your item was purchased
with the attached images and a description of your claim.
Return / Damage Claim Instructions
15
16
Open the seat belt buckle, then put in the cushion U and lock the buckle. Unfold
the drawer V and put in the base plate, then push the drawer into the product.
Connect the seat belt T with screws R.
12 13
In case a return is required, the item must be returned in original
box. Without this your return will not be accepted.
DO NOT discard the box / original packaging.
Take a photo of the box markings.
Take a photo of the damaged part (if applicable).
Send us an email with the images requested.
A photo of the markings (text) on the side of the box is required in
case a part is needed for replacement. This helps our staff identify
your product number to ensure you receive the correct parts.
A photo of the damage is always required to file a claim and get
your replacement or refund processed quickly. Please make sure
you have the box even if it is damaged.
Email us directly from marketplace where your item was purchased
with the attached images and a description of your claim.
Return / Damage Claim Instructions
15
16
Open the seat belt buckle, then put in the cushion U and lock the buckle. Unfold
the drawer V and put in the base plate, then push the drawer into the product.
Connect the seat belt T with screws R.
12 13
AC10019
Baby Changing Table
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
USA office: Fontana GBR office: Ipswich AUS office: Truganina
If you're having difficulty, our friendly
customer team is always here to help.
AUS:cs.au@costway.com
GBR:cs.uk@costway.com
