Loading ...
Loading ...
Loading ...
Introduction
5
1
No. Name Description
8 Power Turns on (green) when power is on.
9 Status Turns on (green) when the system is ready.
10 Audio Out Connects a speaker for audio output.
11 Audio In Connects a microphone for audio input.
12 Link
Turns on (green) when the network is
connected.
13 ACT
Turns on (orange) when data are being
transmitted.
14 DC 12V Port Connects to power.
15 LAN / PoE Connects to a 10/100 Ethernet or PoE.
16 Tilt Screw
Loosens the screw to adjust tilt angle.
17 I/O Terminal Block
Connects to I/O devices. For details, see 1.5
I/O Terminal Block.
Note: For GV-EFD2101 / GV-EFD3101 / GV-EFD5101, the TV-out
function can only be used during installation to adjust the focus of the
camera. To use the TV out function, connect the supplied black BNC
connector to a monitor and select your signal format (NTSC or PAL) at
the TV Out field on the Web interface. The default signal format is
NTSC. For details, see 4.1.1 Video Settings, GV-IPCam Firmware
Manual. The TV-out wire must be removed before you secure the
housing cover.
Loading ...
Loading ...
Loading ...