Classic 36-Inch Smart Tower Fan
Questions or Concerns?
Please contact us Mon–Fri, 9:00 am–5:00 pm PST/PDT
at [email protected] or at 1-888-726-8520.
USER MANUAL
2 3
Table of Contents
Package Contents
Specifications
Important Safeguards & Warnings
Getting to Know Your Smart Tower Fan
Controls & Display
Remote Control
Getting Started
Using Your Smart Tower Fan
Care & Maintenance
Troubleshooting
Limited Warranty Information
Customer Support
2
2
3
6
7
8
9
11
14
15
18
19
Package Contents
1 x Smart Tower Fan
2 x Base
1 x Plastic Nut
1 x Remote Control
1 x Quick Start Guide
1 x User Manual
Specifications
Model LTF-F362S-WUSR
Power Supply 120V, 60Hz
Rated Power 27W
Max Speed 26 ft/s
Noise Level 25–48dB
Dimensions 6.5 x 6.5 x 36.2 in /
16.5 x 16.5 x 92 cm
Weight 8.8 lb / 4.0 kg
IMPORTANT SAFEGUARDS & WARNINGS
• Only use your tower fan as described in
this manual. Any other use may cause a
fire, electric shock, or personal injury.
• Do not use your tower fan outdoors.
• To protect against electric shock, do not
immerse the tower fan cord or housing
in water or spray with liquids.
• Do not place the tower fan in a window.
Keep your tower fan away from water and
wet or damp areas.
• Keep your tower fan away from open
flames, heat sources, or other heating and
cooking appliances.
• Do not use where combustible gases, vapors,
metallic dust, aerosol (spray) products, or
fumes from industrial oil are present.
• Do not place anything into any opening
on the tower fan.
• Do not use with any openings blocked.
Keep free of dust, lint, hair, and anything
that may reduce airflow.
• Avoid contact with moving fan parts.
• Do not hang or mount the tower fan on a
wall or ceiling.
• Only use the tower fan on a dry and
level surface.
• Close supervision is necessary when the
tower fan is used by or near children.
• Children should be supervised to ensure
that they do not play with the tower fan.
• Children should be supervised to ensure
they do not insert fingers or objects into
the vent openings.
• Children should not clean or perform
maintenance on the tower fan
without supervision.
• Keep the inside of the tower fan dry. To
prevent moisture buildup, avoid placing
in rooms with major temperature or
humidity changes.
To reduce the risk of fire, electric shock, or other injury, follow all instructions and safety
guidelines.
General Safety
READ AND SAVE THESE
INSTRUCTIONS
• Unplug the tower fan when not in use for
an extended period of time.
• Do not use other items or third-party parts
as replacement parts for this tower fan.
• Do not use your tower fan if it is damaged
or not working correctly, or if the cord is
damaged. Do not try to repair it yourself.
Contact Customer Support (see page 19).
• WARNING: To reduce the risk of fire or
electric shock, do not use this tower fan
with any solid-state speed controls (such
as a dimmer switch).
• Ensure that the fan is switched o from the
supply mains before removing the guard.
• Do not operate any fan with a damaged
cord or plug. Discard fan or return to an
authorized service facility for examination
and/or repair.
• Do not run cord under carpeting. Do
not cover cord with throw rugs, runners, or
similar coverings. Do not route cord under
furniture or appliances. Arrange cord away
from trac area and where it will not be
tripped over.
• This tower fan is not to be used by persons
(including children) with reduced physical,
sensory, or mental capacities, or lack of
experience and knowledge, unless they
have been given supervision or instruction
concerning the use of the appliance by a
person responsible for their safety.
• Not for commercial or industrial use.
Household use only.
Power Cord & Fuse
• Your tower fan has a polarized plug (one
prong is wider than the other), which fits
into a polarized outlet only one way. If the
plug does not fit, reverse the plug. If it still
does not fit, do not use the plug in that
outlet. Do not alter the plug in any way.
2 3
Table of Contents
Package Contents
Specifications
Important Safeguards & Warnings
Getting to Know Your Smart Tower Fan
Controls & Display
Remote Control
Getting Started
Using Your Smart Tower Fan
Care & Maintenance
Troubleshooting
Limited Warranty Information
Customer Support
2
2
3
6
7
8
9
11
14
15
18
19
Package Contents
1 x Smart Tower Fan
2 x Base
1 x Plastic Nut
1 x Remote Control
1 x Quick Start Guide
1 x User Manual
Specifications
Model LTF-F362S-WUSR
Power Supply 120V, 60Hz
Rated Power 27W
Max Speed 26 ft/s
Noise Level 25–48dB
Dimensions 6.5 x 6.5 x 36.2 in /
16.5 x 16.5 x 92 cm
Weight 8.8 lb / 4.0 kg
IMPORTANT SAFEGUARDS & WARNINGS
• Only use your tower fan as described in
this manual. Any other use may cause a
fire, electric shock, or personal injury.
• Do not use your tower fan outdoors.
• To protect against electric shock, do not
immerse the tower fan cord or housing
in water or spray with liquids.
• Do not place the tower fan in a window.
Keep your tower fan away from water and
wet or damp areas.
• Keep your tower fan away from open
flames, heat sources, or other heating and
cooking appliances.
• Do not use where combustible gases, vapors,
metallic dust, aerosol (spray) products, or
fumes from industrial oil are present.
• Do not place anything into any opening
on the tower fan.
• Do not use with any openings blocked.
Keep free of dust, lint, hair, and anything
that may reduce airflow.
• Avoid contact with moving fan parts.
• Do not hang or mount the tower fan on a
wall or ceiling.
• Only use the tower fan on a dry and
level surface.
• Close supervision is necessary when the
tower fan is used by or near children.
• Children should be supervised to ensure
that they do not play with the tower fan.
• Children should be supervised to ensure
they do not insert fingers or objects into
the vent openings.
• Children should not clean or perform
maintenance on the tower fan
without supervision.
• Keep the inside of the tower fan dry. To
prevent moisture buildup, avoid placing
in rooms with major temperature or
humidity changes.
To reduce the risk of fire, electric shock, or other injury, follow all instructions and safety
guidelines.
General Safety
READ AND SAVE THESE
INSTRUCTIONS
• Unplug the tower fan when not in use for
an extended period of time.
• Do not use other items or third-party parts
as replacement parts for this tower fan.
• Do not use your tower fan if it is damaged
or not working correctly, or if the cord is
damaged. Do not try to repair it yourself.
Contact Customer Support (see page 19).
• WARNING: To reduce the risk of fire or
electric shock, do not use this tower fan
with any solid-state speed controls (such
as a dimmer switch).
• Ensure that the fan is switched o from the
supply mains before removing the guard.
• Do not operate any fan with a damaged
cord or plug. Discard fan or return to an
authorized service facility for examination
and/or repair.
• Do not run cord under carpeting. Do
not cover cord with throw rugs, runners, or
similar coverings. Do not route cord under
furniture or appliances. Arrange cord away
from trac area and where it will not be
tripped over.
• This tower fan is not to be used by persons
(including children) with reduced physical,
sensory, or mental capacities, or lack of
experience and knowledge, unless they
have been given supervision or instruction
concerning the use of the appliance by a
person responsible for their safety.
• Not for commercial or industrial use.
Household use only.
Power Cord & Fuse
• Your tower fan has a polarized plug (one
prong is wider than the other), which fits
into a polarized outlet only one way. If the
plug does not fit, reverse the plug. If it still
does not fit, do not use the plug in that
outlet. Do not alter the plug in any way.
4 5
Electromagnetic Fields (EMF)
Your Levoit smart tower fan complies with all
standards regarding electromagnetic fields (EMF). If
handled properly and according to the instructions
in this user manual, the appliance is safe to use
based on scientific evidence available today.
This product contains a coin/button battery.
INGESTION HAZARD:
These sorts of symptoms vary or fluctuate, with
the pain increasing and then subsiding.
A specific symptom to button and coin battery
ingestion is vomiting fresh (bright red) blood. If a
child does this, seek immediate medical help.
The lack of clear symptoms is why it is important
to be cautious with “flat” or spare button or coin
batteries in the home and the products that
contain them. Be aware that even used button
or coin batteries may cause injury.
Unfortunately, it is not obvious when a button
or coin battery is stuck in a child’s esophagus
(food pipe). The child might:
• Cough, gag or drool a lot;
• Appear to have a stomach upset or a virus;
• Be sick;
• Point to their throat or stomach;
• Have pain in their abdomen, chest, or throat;
• Be tired or lethargic;
• Be quieter or more clingy than usual or
otherwise “not themselves”;
• Lose their appetite or have a reduced appetite;
• Not want to eat solid food / be unable to eat
solid food.
• DEATH or serious injury can occur if
ingested;
• A swallowed button cell or coin battery
can cause Internal Chemical Burns in as
little as 2 hours;
• KEEP new and used batteries OUT OF
REACH of CHILDREN;
• Seek immediate medical attention if a
battery is suspected to be swallowed or
inserted inside any part of the body;
• Remove and immediately recycle or
dispose of used batteries according to
local regulations and keep away from
children. DO NOT dispose of batteries in
household trash or incinerate;
• Even used batteries may cause severe
injury or death;
• Call a local poison control center for
treatment information;
• Only use with a 3V CR2025 battery;
• Non-rechargeable batteries are not to be
recharged;
• Do not force discharge, recharge,
disassemble, heat above (manufacturer’s
specified temperature rating) or incinerate.
Doing so may result in injury due to
venting, leakage or explosion resulting in
chemical burns;
• Ensure the batteries are installed correctly
according to polarity (+ and -);
• Do not mix old and new batteries,
dierent brands or types of batteries, such
as alkaline, carbon-zinc, or rechargeable
batteries;
• Remove and immediately recycle or
dispose of batteries from equipment
not used for an extended period of time
according to local regulations;
• Turn o the tower fan before removing the
plug from the outlet. To unplug, grab the
plug and pull from the outlet. Never pull
from the power cord.
• Keep the tower fan near the outlet it is
plugged into. The use of an extension cord
is not recommended.
• Always turn the tower fan o and unplug
it when not in use and before moving,
cleaning, or servicing the fan.
• Never place the cord near any heat source.
• Do not cover the cord with a rug, carpet, or
other covering. Do not place the cord under
furniture or appliances.
• To avoid a tripping hazard, keep the cord
out of areas where people walk often. Place
the cord where it will not be tripped over
and safely coil the cord.
• A loose fit between the AC outlet and plug
may cause overheating and a distortion of
the plug. Contact a qualified electrician to
replace a loose or worn outlet.
• This product employs overload protection
(fuse). A blown fuse indicates an overload
or short-circuit situation. If the fuse blows,
unplug the product from the outlet.
Replace the fuse as per the user servicing
instructions (follow product marking for
proper fuse rating) and check the product.
To replace the fuse, see Replacing the
Fuse, page 14. If the replacement fuse
blows, a short-circuit may be present
and the product should be discarded or
returned to an authorized service facility for
examination and/or repair. Please contact
Customer Support (see page 19).
• If the power cord is damaged, it must
be replaced by Arovast Corporation or
similarly qualified persons in order to avoid
an electric or fire hazard. Please contact
Customer Support (see page 19).
• Your tower fan should only be used
with 120V, 60Hz electrical systems. Do
not plug into another type of outlet.
• Unplugging the power cord will disable
remote control of the tower fan and
temporarily disconnect the tower fan from
VeSync and other third-party apps.
SAVE THESE
INSTRUCTIONS
This product contains a button cell or
coin battery.
WARNING: CHEMICAL BURN HAZARD.
• Always completely secure the battery
compartment. If the battery compartment
does not close securely, stop using the
product, remove the batteries, and keep
them away from children.
• Place sticky tape around both sides of the
battery and dispose of it immediately in an
outdoor trashcan or recycle safely;
• Store spare batteries securely;
• Empty recycling units on a regular basis;
• Use non-transparent containers to keep
the batteries out of view.
WARNING
4 5
Electromagnetic Fields (EMF)
Your Levoit smart tower fan complies with all
standards regarding electromagnetic fields (EMF). If
handled properly and according to the instructions
in this user manual, the appliance is safe to use
based on scientific evidence available today.
This product contains a coin/button battery.
INGESTION HAZARD:
These sorts of symptoms vary or fluctuate, with
the pain increasing and then subsiding.
A specific symptom to button and coin battery
ingestion is vomiting fresh (bright red) blood. If a
child does this, seek immediate medical help.
The lack of clear symptoms is why it is important
to be cautious with “flat” or spare button or coin
batteries in the home and the products that
contain them. Be aware that even used button
or coin batteries may cause injury.
Unfortunately, it is not obvious when a button
or coin battery is stuck in a child’s esophagus
(food pipe). The child might:
• Cough, gag or drool a lot;
• Appear to have a stomach upset or a virus;
• Be sick;
• Point to their throat or stomach;
• Have pain in their abdomen, chest, or throat;
• Be tired or lethargic;
• Be quieter or more clingy than usual or
otherwise “not themselves”;
• Lose their appetite or have a reduced appetite;
• Not want to eat solid food / be unable to eat
solid food.
• DEATH or serious injury can occur if
ingested;
• A swallowed button cell or coin battery
can cause Internal Chemical Burns in as
little as 2 hours;
• KEEP new and used batteries OUT OF
REACH of CHILDREN;
• Seek immediate medical attention if a
battery is suspected to be swallowed or
inserted inside any part of the body;
• Remove and immediately recycle or
dispose of used batteries according to
local regulations and keep away from
children. DO NOT dispose of batteries in
household trash or incinerate;
• Even used batteries may cause severe
injury or death;
• Call a local poison control center for
treatment information;
• Only use with a 3V CR2025 battery;
• Non-rechargeable batteries are not to be
recharged;
• Do not force discharge, recharge,
disassemble, heat above (manufacturer’s
specified temperature rating) or incinerate.
Doing so may result in injury due to
venting, leakage or explosion resulting in
chemical burns;
• Ensure the batteries are installed correctly
according to polarity (+ and -);
• Do not mix old and new batteries,
dierent brands or types of batteries, such
as alkaline, carbon-zinc, or rechargeable
batteries;
• Remove and immediately recycle or
dispose of batteries from equipment
not used for an extended period of time
according to local regulations;
• Turn o the tower fan before removing the
plug from the outlet. To unplug, grab the
plug and pull from the outlet. Never pull
from the power cord.
• Keep the tower fan near the outlet it is
plugged into. The use of an extension cord
is not recommended.
• Always turn the tower fan o and unplug
it when not in use and before moving,
cleaning, or servicing the fan.
• Never place the cord near any heat source.
• Do not cover the cord with a rug, carpet, or
other covering. Do not place the cord under
furniture or appliances.
• To avoid a tripping hazard, keep the cord
out of areas where people walk often. Place
the cord where it will not be tripped over
and safely coil the cord.
• A loose fit between the AC outlet and plug
may cause overheating and a distortion of
the plug. Contact a qualified electrician to
replace a loose or worn outlet.
• This product employs overload protection
(fuse). A blown fuse indicates an overload
or short-circuit situation. If the fuse blows,
unplug the product from the outlet.
Replace the fuse as per the user servicing
instructions (follow product marking for
proper fuse rating) and check the product.
To replace the fuse, see Replacing the
Fuse, page 14. If the replacement fuse
blows, a short-circuit may be present
and the product should be discarded or
returned to an authorized service facility for
examination and/or repair. Please contact
Customer Support (see page 19).
• If the power cord is damaged, it must
be replaced by Arovast Corporation or
similarly qualified persons in order to avoid
an electric or fire hazard. Please contact
Customer Support (see page 19).
• Your tower fan should only be used
with 120V, 60Hz electrical systems. Do
not plug into another type of outlet.
• Unplugging the power cord will disable
remote control of the tower fan and
temporarily disconnect the tower fan from
VeSync and other third-party apps.
SAVE THESE
INSTRUCTIONS
This product contains a button cell or
coin battery.
WARNING: CHEMICAL BURN HAZARD.
• Always completely secure the battery
compartment. If the battery compartment
does not close securely, stop using the
product, remove the batteries, and keep
them away from children.
• Place sticky tape around both sides of the
battery and dispose of it immediately in an
outdoor trashcan or recycle safely;
• Store spare batteries securely;
• Empty recycling units on a regular basis;
• Use non-transparent containers to keep
the batteries out of view.
WARNING
6 7
CONTROLS & DISPLAY
On/O Button
• Tap to turn the tower fan
on/o.
• Press and hold for 5
seconds to connect the
tower fan to the VeSync
app. See the in-app
instructions for more
information (see page 13).
• Press and hold for 15
seconds to reset the tower
fan and disconnect from
Wi-Fi® (see page 10).
Fan Speed Button
• Tap to cycle through fan
speeds from 1 (low) to
12 (high).
Fan Mode Button
• Tap to cycle through fan
modes: Normal, Turbo,
and Auto (see Fan Modes,
page 11).
• Press and hold for 3 seconds
to turn selection sounds
and the display on/o (see
Sound & Display O,
page 13).
Timer Button
• Tap to cycle through timer
options from 1–12 hours.
• Press and hold to quickly
cycle through options in
increments of 1 hour.
Advanced Sleep Mode Button
• Tap to turn Advanced
Sleep Mode on/o (see
Advanced Sleep Mode,
page 12).
Oscillate Button
• Tap to turn oscillation on/o.
• The tower fan has a 90°
angle of oscillation.
Wi-Fi
®
Indicator
• Blinks when connecting
to the VeSync app, lights
up when connected to
VeSync, and is o when
disconnected from
VeSync. See the VeSync
in-app instructions for more
information (see page 13).
Note:
You can also use the VeSync app to control these functions, as well as additional
app-only features (see page 13).
GETTING TO KNOW YOUR SMART TOWER FAN
A. Control Panel
B. LED Display
C. Vents
D. Power Cord
E. Remote Control
F. Fan Blade
G. Back Cover
H. Base
I. Plastic Nut (underneath base)
J. Oscillate Button
K. Fan Mode Button
L. On/O Button
M. Advanced Sleep Mode Button
N. Timer Button
O. Fan Speed Button
LED Display
Control Panel
P. Advanced Sleep Mode Indicator
Q. Normal Mode Indicator
R. Auto Mode Indicator
S. Turbo Mode Indicator
T. Fahrenheit Indicator
U. Wi-Fi
®
Indicator
V. Sound O Indicator
W. Hour Indicator
F
S
L
W
A
H
I
B
C
D
E
Q U
R V
G
P T
J
K
M
N
O
6 7
CONTROLS & DISPLAY
On/O Button
• Tap to turn the tower fan
on/o.
• Press and hold for 5
seconds to connect the
tower fan to the VeSync
app. See the in-app
instructions for more
information (see page 13).
• Press and hold for 15
seconds to reset the tower
fan and disconnect from
Wi-Fi® (see page 10).
Fan Speed Button
• Tap to cycle through fan
speeds from 1 (low) to
12 (high).
Fan Mode Button
• Tap to cycle through fan
modes: Normal, Turbo,
and Auto (see Fan Modes,
page 11).
• Press and hold for 3 seconds
to turn selection sounds
and the display on/o (see
Sound & Display O,
page 13).
Timer Button
• Tap to cycle through timer
options from 1–12 hours.
• Press and hold to quickly
cycle through options in
increments of 1 hour.
Advanced Sleep Mode Button
• Tap to turn Advanced
Sleep Mode on/o (see
Advanced Sleep Mode,
page 12).
Oscillate Button
• Tap to turn oscillation on/o.
• The tower fan has a 90°
angle of oscillation.
Wi-Fi
®
Indicator
• Blinks when connecting
to the VeSync app, lights
up when connected to
VeSync, and is o when
disconnected from
VeSync. See the VeSync
in-app instructions for more
information (see page 13).
Note:
You can also use the VeSync app to control these functions, as well as additional
app-only features (see page 13).
GETTING TO KNOW YOUR SMART TOWER FAN
A. Control Panel
B. LED Display
C. Vents
D. Power Cord
E. Remote Control
F. Fan Blade
G. Back Cover
H. Base
I. Plastic Nut (underneath base)
J. Oscillate Button
K. Fan Mode Button
L. On/O Button
M. Advanced Sleep Mode Button
N. Timer Button
O. Fan Speed Button
LED Display
Control Panel
P. Advanced Sleep Mode Indicator
Q. Normal Mode Indicator
R. Auto Mode Indicator
S. Turbo Mode Indicator
T. Fahrenheit Indicator
U. Wi-Fi
®
Indicator
V. Sound O Indicator
W. Hour Indicator
F
S
L
W
A
H
I
B
C
D
E
Q U
R V
G
P T
J
K
M
N
O
8 9
15 in /
38 cm
15 in /
38 cm
REMOTE CONTROL
Sound & Display O Button
• Press to turn selection sounds
and display on/o (see Sound
& Display O, page 13).
Note:
• Remove the plastic tab from the remote
control’s battery compartment before using.
•
To replace the battery, see page 14.
The remote control can be used to control
any of the tower fan’s functions from a
distance. The remote must be within 16 ft /
5 m of the tower fan to work.
On/O
Button
Sound &
Display O
Button
Timer
Button
Fan Mode
Button
Oscillate
Button
Advanced
Sleep Mode
Button
Increase/
Decrease
Fan Speed
Buttons
WARNING: Do not use the fan before finishing assembly.
GETTING STARTED
1. Remove all packaging.
2. Snap the two pieces of the base
together. [Figure 1.1]
Figure 1.1
Figure 1.2
Figure 1.3
3. Unscrew the plastic nut from underneath
the tower fan. [Figure 1.2]
4. Secure the base to the tower fan with the
plastic nut. [Figure 1.3]
5. Place the tower fan on a flat, stable
surface such as the floor. Plug in and
turn on.
6. When using the tower fan, allow at least
15 inches / 38 cm of clearance from the
front of the tower fan. Keep away from
anything that would block airflow, such as
curtains. [Figure 1.4]
Figure 1.4
Note: If the tower fan is unstable, firmly tighten the
plastic nut.
8 9
15 in /
38 cm
15 in /
38 cm
REMOTE CONTROL
Sound & Display O Button
• Press to turn selection sounds
and display on/o (see Sound
& Display O, page 13).
Note:
• Remove the plastic tab from the remote
control’s battery compartment before using.
•
To replace the battery, see page 14.
The remote control can be used to control
any of the tower fan’s functions from a
distance. The remote must be within 16 ft /
5 m of the tower fan to work.
On/O
Button
Sound &
Display O
Button
Timer
Button
Fan Mode
Button
Oscillate
Button
Advanced
Sleep Mode
Button
Increase/
Decrease
Fan Speed
Buttons
WARNING: Do not use the fan before finishing assembly.
GETTING STARTED
1. Remove all packaging.
2. Snap the two pieces of the base
together. [Figure 1.1]
Figure 1.1
Figure 1.2
Figure 1.3
3. Unscrew the plastic nut from underneath
the tower fan. [Figure 1.2]
4. Secure the base to the tower fan with the
plastic nut. [Figure 1.3]
5. Place the tower fan on a flat, stable
surface such as the floor. Plug in and
turn on.
6. When using the tower fan, allow at least
15 inches / 38 cm of clearance from the
front of the tower fan. Keep away from
anything that would block airflow, such as
curtains. [Figure 1.4]
Figure 1.4
Note: If the tower fan is unstable, firmly tighten the
plastic nut.
10 11
Note:
• You must create your own VeSync account to
access voice assistants.
• A list of voice commands is available under
settings in the VeSync app.
• To disconnect Wi-Fi, press and hold
for 15 seconds until the Wi-Fi indicator
turns o. This will restore the smart tower
fan’s default settings and disconnect it
from the VeSync app.
• To reconnect, please follow the
instructions in the VeSync app for adding
a device.
You can use the VeSync app to connect
your smart tower fan to Amazon Alexa or
Google Assistant™. Please follow the in-app
instructions to set up your voice assistant.
Wi-Fi
®
Connection
Connect with Amazon Alexa or
Google Assistant™
Note: For Android™ users, choose “Allow” to
use VeSync.
Note: You must create your own VeSync
account to use third-party services and
products. These will not work with a guest
account. With a VeSync account, you can
also allow your family and friends to control
your smart tower fan.
Note: Your phone must have Location
turned on while your phone is connecting to
your smart tower fan. This is required to
establish the Bluetooth® connection. You
can turn Location o after your smart
tower fan is finished connecting to
the VeSync app.
1. To download the VeSync app, scan the
QR code or search “VeSync” in the Apple
App Store® or Google Play Store.
VeSync App Setup
2. Open the VeSync app. Log In or
Sign Up.
3. Follow the in-app instructions to set up
your smart tower fan.
GETTING STARTED (CONT.)
Note:
• The VeSync app is continually being improved
and may change over time. If there are any
dierences, follow the in-app instructions.
• Requires device to run app, Wi-Fi or mobile
data, and iOS version 12 or Android version 6
(or above). Standard data and messaging rates
may apply. Registration is required.
Use Turbo Mode with air conditioning to
quickly circulate air in your home.
Turbo Mode
USING YOUR SMART TOWER FAN
1. Tap to turn on the tower fan.
2. Tap to change fan speed from
1 (low) to 12 (high).
3. Optionally, tap to select a dierent
fan mode.
4. Tap to turn Advanced Sleep Mode
on/o.
1. Tap and select Turbo Mode.
will show on the display.
2. The tower fan automatically starts
oscillating and operates at fan speed 12.
3. When the room temperature drops 5°F,
the fan speed will decrease to 6, then
the tower fan will automatically adjust
fan speed according to the room temperature.
Note: You can turn o oscillation by tapping
on the tower fan or pressing on the remote.
Tap to cycle through fan modes:
Normal, Turbo, and Auto.
• This is the tower fan’s default mode.
• will show on the display.
Fan Modes
Normal Mode
Use Normal Mode to manually control the
tower fan’s speed. Tap to change fan
speed from 1 (low) to 12 (high).
10 11
Note:
• You must create your own VeSync account to
access voice assistants.
• A list of voice commands is available under
settings in the VeSync app.
• To disconnect Wi-Fi, press and hold
for 15 seconds until the Wi-Fi indicator
turns o. This will restore the smart tower
fan’s default settings and disconnect it
from the VeSync app.
• To reconnect, please follow the
instructions in the VeSync app for adding
a device.
You can use the VeSync app to connect
your smart tower fan to Amazon Alexa or
Google Assistant™. Please follow the in-app
instructions to set up your voice assistant.
Wi-Fi
®
Connection
Connect with Amazon Alexa or
Google Assistant™
Note: For Android™ users, choose “Allow” to
use VeSync.
Note: You must create your own VeSync
account to use third-party services and
products. These will not work with a guest
account. With a VeSync account, you can
also allow your family and friends to control
your smart tower fan.
Note: Your phone must have Location
turned on while your phone is connecting to
your smart tower fan. This is required to
establish the Bluetooth® connection. You
can turn Location o after your smart
tower fan is finished connecting to
the VeSync app.
1. To download the VeSync app, scan the
QR code or search “VeSync” in the Apple
App Store® or Google Play Store.
VeSync App Setup
2. Open the VeSync app. Log In or
Sign Up.
3. Follow the in-app instructions to set up
your smart tower fan.
GETTING STARTED (CONT.)
Note:
• The VeSync app is continually being improved
and may change over time. If there are any
dierences, follow the in-app instructions.
• Requires device to run app, Wi-Fi or mobile
data, and iOS version 12 or Android version 6
(or above). Standard data and messaging rates
may apply. Registration is required.
Use Turbo Mode with air conditioning to
quickly circulate air in your home.
Turbo Mode
USING YOUR SMART TOWER FAN
1. Tap to turn on the tower fan.
2. Tap to change fan speed from
1 (low) to 12 (high).
3. Optionally, tap to select a dierent
fan mode.
4. Tap to turn Advanced Sleep Mode
on/o.
1. Tap and select Turbo Mode.
will show on the display.
2. The tower fan automatically starts
oscillating and operates at fan speed 12.
3. When the room temperature drops 5°F,
the fan speed will decrease to 6, then
the tower fan will automatically adjust
fan speed according to the room temperature.
Note: You can turn o oscillation by tapping
on the tower fan or pressing on the remote.
Tap to cycle through fan modes:
Normal, Turbo, and Auto.
• This is the tower fan’s default mode.
• will show on the display.
Fan Modes
Normal Mode
Use Normal Mode to manually control the
tower fan’s speed. Tap to change fan
speed from 1 (low) to 12 (high).
12 13
Advanced Sleep Mode is an optimized sleep
mode that takes into account the stages
before you sleep, during sleep, and as you
wake up.
Use Auto Mode for automatic fan speed
adjustments according to the room
temperature.
Advanced Sleep ModeAuto Mode
USING YOUR SMART TOWER FAN (CONT.)
1. Tap to turn Advanced Sleep Mode
on. and will show on the display.
a. After 5 seconds, the display will
turn o and selection sounds will
be disabled.
b. The starting fan speed is determined
by your current fan speed when you
select Advanced Sleep Mode.
2. After 1 hour, the fan speed will decrease
as the room temperature stabilizes.
3. The tower fan will begin to automatically
adjust the fan speed according to the
fluctuating room temperature as you
sleep and wake up.
a. If the temperature increases 2°F, the
fan speed will increase one level.
b. If the temperature decreases 2°F, the
fan speed will decrease one level.
4. Tap or to turn Advanced
Sleep Mode o.
1. Tap and select Auto Mode.
will show on the display.
2. The starting fan speed is determined by
the current room temperature.
Note: The max ambient working temperature
is 104°F.
3. Optionally, tap to manually adjust
the fan speed while in Auto Mode. The
tower fan will then operate according to
the following logic:
a. If the temperature increases 2°F, the
fan speed will increase one level.
b. If the temperature decreases 2°F, the
fan speed will decrease one level.
Room
Temperature
Fan Speed
≤ 70°F 1
72°F 2
74°F 3
76°F 4
78°F 5
80°F 6
82°F 7
84°F 8
86°F 9
88°F 10
90°F 11
> 90°F 12
When the tower fan is in standby or turned
o and unplugged, it will remember all its
previous settings, except for the timer.
1. Press and hold for 3 seconds to
turn o selection sounds and the display.
will show on the display.
2. Optionally, press on the
remote control.
3. After 5 seconds of no operation, the
display will automatically turn o and
selection sounds will be disabled.
4. Tap any button to temporarily turn the
display back on. If you don’t tap another
button, the display will turn back o after
5 seconds.
5. Press and hold for 3 seconds
(or press on the remote) to turn on
selection sounds and the display.
• The tower fan is in Standby Mode
when it is turned o, but plugged in.
• Tap to turn the tower fan on.
Sound & Display Off
Memory Function
Standby Mode
USING YOUR SMART TOWER FAN (CONT.)
Note: You can also use the VeSync app to turn
the selection sounds on/o or the display on/o.
The VeSync app allows you to access additional
smart tower fan functions, including those listed
below. As the app develops, more features may
become available.
Remote Control
• Change any tower fan settings
through the app.
Advanced Sleep Mode
• Adjust Advanced Sleep Mode settings
to fit your own sleep habits.
Timer Function
• Set a timer between 1–24 hours.
• Easily view the exact time remaining
on a timer.
VeSync App Functions
Schedules
• Create and customize schedules for
your tower fan to match your routines.
Display & Sound
• Set your display and sound
preference—you can turn the display
on/o or sounds on/o.
12 13
Advanced Sleep Mode is an optimized sleep
mode that takes into account the stages
before you sleep, during sleep, and as you
wake up.
Use Auto Mode for automatic fan speed
adjustments according to the room
temperature.
Advanced Sleep ModeAuto Mode
USING YOUR SMART TOWER FAN (CONT.)
1. Tap to turn Advanced Sleep Mode
on. and will show on the display.
a. After 5 seconds, the display will
turn o and selection sounds will
be disabled.
b. The starting fan speed is determined
by your current fan speed when you
select Advanced Sleep Mode.
2. After 1 hour, the fan speed will decrease
as the room temperature stabilizes.
3. The tower fan will begin to automatically
adjust the fan speed according to the
fluctuating room temperature as you
sleep and wake up.
a. If the temperature increases 2°F, the
fan speed will increase one level.
b. If the temperature decreases 2°F, the
fan speed will decrease one level.
4. Tap or to turn Advanced
Sleep Mode o.
1. Tap and select Auto Mode.
will show on the display.
2. The starting fan speed is determined by
the current room temperature.
Note: The max ambient working temperature
is 104°F.
3. Optionally, tap to manually adjust
the fan speed while in Auto Mode. The
tower fan will then operate according to
the following logic:
a. If the temperature increases 2°F, the
fan speed will increase one level.
b. If the temperature decreases 2°F, the
fan speed will decrease one level.
Room
Temperature
Fan Speed
≤ 70°F 1
72°F 2
74°F 3
76°F 4
78°F 5
80°F 6
82°F 7
84°F 8
86°F 9
88°F 10
90°F 11
> 90°F 12
When the tower fan is in standby or turned
o and unplugged, it will remember all its
previous settings, except for the timer.
1. Press and hold for 3 seconds to
turn o selection sounds and the display.
will show on the display.
2. Optionally, press on the
remote control.
3. After 5 seconds of no operation, the
display will automatically turn o and
selection sounds will be disabled.
4. Tap any button to temporarily turn the
display back on. If you don’t tap another
button, the display will turn back o after
5 seconds.
5. Press and hold for 3 seconds
(or press on the remote) to turn on
selection sounds and the display.
• The tower fan is in Standby Mode
when it is turned o, but plugged in.
• Tap to turn the tower fan on.
Sound & Display Off
Memory Function
Standby Mode
USING YOUR SMART TOWER FAN (CONT.)
Note: You can also use the VeSync app to turn
the selection sounds on/o or the display on/o.
The VeSync app allows you to access additional
smart tower fan functions, including those listed
below. As the app develops, more features may
become available.
Remote Control
• Change any tower fan settings
through the app.
Advanced Sleep Mode
• Adjust Advanced Sleep Mode settings
to fit your own sleep habits.
Timer Function
• Set a timer between 1–24 hours.
• Easily view the exact time remaining
on a timer.
VeSync App Functions
Schedules
• Create and customize schedules for
your tower fan to match your routines.
Display & Sound
• Set your display and sound
preference—you can turn the display
on/o or sounds on/o.
14 15
CARE &
MAINTENANCE
Cleaning the Tower Fan
1. Unplug before cleaning.
2. Wipe the outside of the tower fan with
a soft, dry cloth. If necessary, wipe
the housing with a damp cloth, then
immediately dry.
3. Use a vacuum, duster, or compressed air
to clean the inside of the tower fan.
4. If necessary, use a screwdriver to remove
the back cover and clean the inside of
the tower fan. [Figure 2.1]
Figure 2.1
• Do not clean with abrasive chemicals
or flammable cleaning agents.
Note:
• Make sure the tower fan is turned o
before removing the back cover.
• Clean the internal parts with a
dry cloth.
Replacing the Remote Control
Battery
Replacing the Fuse
Figure 2.2
Figure 2.3
1. Insert a coin/button battery into the slot
and rotate counterclockwise to remove
the battery compartment. [Figure 2.2]
2. Remove the old battery.
3. Replace with a new 3V CR2025 battery.
Make sure the polarities match.
[Figure 2.3]
4. Replace the battery compartment.
Problem Possible Solution
Tower fan will not turn on or
respond to button controls.
Plug in the tower fan.
Check to see if the power cord is damaged. If so, stop using
the tower fan and contact Customer Support (see page 19).
Plug the tower fan into a dierent outlet.
Tower fan may be malfunctioning. Contact Customer Support
(see page 19).
Tower fan makes an unusual
noise while the fan is on.
Make sure the tower fan is operating on a hard, flat,
level surface.
Tower fan may be damaged, or a foreign object may be
inside. Stop using the tower fan and contact Customer
Support (see page 19). Do not try to repair the tower fan.
Tower fan randomly turns o. Tower fan is malfunctioning. Stop using the tower fan and
contact Customer Support (see page 19).
TROUBLESHOOTING
If your problem is not listed, please contact Customer Support (see page 19).
If not using the tower fan for an extended
period of time, cover the tower fan and store
in a cool, dry place to avoid moisture damage.
Storage
Figure 2.5
4. Risk of Fire: Only
replace the fuse with
a 2.5 Amp, 125V fuse
(3.6 x 10 mm). Do not
use any other type of
fuse. [Figure 2.5]
CAUTION: RISK OF FIRE
Do not replace the plug if it is damaged.
If the plug is damaged in any way, stop
using the tower fan and contact Customer
Support (see page 19).
Note: If the replacement fuse blows, a short-
circuit may be present. Please contact Customer
Support (see page 19).
5. Slide the fuse cover closed.
Figure 2.4
1. Unplug the tower fan. Grab the plug and
pull from the outlet. Never pull from the
power cord.
2. Open the fuse cover on the plug by
sliding the fuse cover toward the
metal prongs. [Figure 2.4]
3. Carefully remove the blown fuse with
tweezers or a small tool. Make sure
not to break the glass fuse.
Open
14 15
CARE &
MAINTENANCE
Cleaning the Tower Fan
1. Unplug before cleaning.
2. Wipe the outside of the tower fan with
a soft, dry cloth. If necessary, wipe
the housing with a damp cloth, then
immediately dry.
3. Use a vacuum, duster, or compressed air
to clean the inside of the tower fan.
4. If necessary, use a screwdriver to remove
the back cover and clean the inside of
the tower fan. [Figure 2.1]
Figure 2.1
• Do not clean with abrasive chemicals
or flammable cleaning agents.
Note:
• Make sure the tower fan is turned o
before removing the back cover.
• Clean the internal parts with a
dry cloth.
Replacing the Remote Control
Battery
Replacing the Fuse
Figure 2.2
Figure 2.3
1. Insert a coin/button battery into the slot
and rotate counterclockwise to remove
the battery compartment. [Figure 2.2]
2. Remove the old battery.
3. Replace with a new 3V CR2025 battery.
Make sure the polarities match.
[Figure 2.3]
4. Replace the battery compartment.
Problem Possible Solution
Tower fan will not turn on or
respond to button controls.
Plug in the tower fan.
Check to see if the power cord is damaged. If so, stop using
the tower fan and contact Customer Support (see page 19).
Plug the tower fan into a dierent outlet.
Tower fan may be malfunctioning. Contact Customer Support
(see page 19).
Tower fan makes an unusual
noise while the fan is on.
Make sure the tower fan is operating on a hard, flat,
level surface.
Tower fan may be damaged, or a foreign object may be
inside. Stop using the tower fan and contact Customer
Support (see page 19). Do not try to repair the tower fan.
Tower fan randomly turns o. Tower fan is malfunctioning. Stop using the tower fan and
contact Customer Support (see page 19).
TROUBLESHOOTING
If your problem is not listed, please contact Customer Support (see page 19).
If not using the tower fan for an extended
period of time, cover the tower fan and store
in a cool, dry place to avoid moisture damage.
Storage
Figure 2.5
4. Risk of Fire: Only
replace the fuse with
a 2.5 Amp, 125V fuse
(3.6 x 10 mm). Do not
use any other type of
fuse. [Figure 2.5]
CAUTION: RISK OF FIRE
Do not replace the plug if it is damaged.
If the plug is damaged in any way, stop
using the tower fan and contact Customer
Support (see page 19).
Note: If the replacement fuse blows, a short-
circuit may be present. Please contact Customer
Support (see page 19).
5. Slide the fuse cover closed.
Figure 2.4
1. Unplug the tower fan. Grab the plug and
pull from the outlet. Never pull from the
power cord.
2. Open the fuse cover on the plug by
sliding the fuse cover toward the
metal prongs. [Figure 2.4]
3. Carefully remove the blown fuse with
tweezers or a small tool. Make sure
not to break the glass fuse.
Open
16 17
If your problem is not listed, please contact Customer Support (see page 19).
VESYNC APP TROUBLESHOOTING
My smart tower fan isn’t connecting to the VeSync app.
• Make sure your phone has Bluetooth® turned on and is not currently connected to
another Bluetooth device.
• During the setup process, you must be on a secure 2.4GHz Wi-Fi® network. Confirm
that the network is working correctly.
• Make sure the Wi-Fi password you entered is correct.
• There should be no spaces at the beginning or end of the password.
• Test the password by connecting a dierent electronic device to the router.
• If you’re manually typing in the SSID and password, double check that both are en-
tered correctly.
• Try moving your tower fan closer to the router. Your phone should be as close as
possible to your tower fan.
• Your router may need to be at a higher location, away from obstructions.
• Make sure your tower fan and router are away from appliances (such as microwave
ovens, refrigerators, electronic devices, etc.) to avoid signal interference.
• If you’re using a VPN, make sure it’s turned o while setting up your tower fan.
• Disable portal authentication for your Wi-Fi network. If portal authentication is en-
abled, the tower fan will not be able to access your Wi-Fi network, and setup will fail.
My smart tower fan is oine.
• Make sure the tower fan is plugged in and has power, then refresh the VeSync menu
by swiping down on the screen.
• Make sure your router is connected to the internet and your phone’s network
connection is working.
• Delete the oine tower fan from the VeSync app. Press and hold your device’s icon,
then tap Delete. Reconfigure the tower fan with the VeSync app.
Note: Portal authentication means that you need to sign in to your Wi-Fi network through
a web page before you can use the Internet.
Note: Power outages, internet outages, or changing Wi-Fi routers may cause the tower fan
to go oine.
FEDERAL COMMUNICATION COMMISSION
INTERFERENCE STATEMENT – PART 15
FCC SDOC SUPPLIER’S DECLARATION
OF CONFORMITY
FCC RADIATION EXPOSURE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Arovast Corporation hereby declares that this equipment is in compliance with FCC requirements.
The declaration of conformity may be consulted in the support section of our website, accessible
from www.levoit.com
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF exposure
compliance. To maintain compliance with FCC RF exposure compliance requirements, please
follow operation instructions as documented in this manual. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter. This equipment should
be installed and operated with a minimum distance of 20 cm between the radiator and your
body. The availability of some specific channels and/or operational frequency bands are country
dependent and are firmware programmed at the factory to match the intended destination. The
firmware setting is not accessible by the end user.
16 17
If your problem is not listed, please contact Customer Support (see page 19).
VESYNC APP TROUBLESHOOTING
My smart tower fan isn’t connecting to the VeSync app.
• Make sure your phone has Bluetooth® turned on and is not currently connected to
another Bluetooth device.
• During the setup process, you must be on a secure 2.4GHz Wi-Fi® network. Confirm
that the network is working correctly.
• Make sure the Wi-Fi password you entered is correct.
• There should be no spaces at the beginning or end of the password.
• Test the password by connecting a dierent electronic device to the router.
• If you’re manually typing in the SSID and password, double check that both are en-
tered correctly.
• Try moving your tower fan closer to the router. Your phone should be as close as
possible to your tower fan.
• Your router may need to be at a higher location, away from obstructions.
• Make sure your tower fan and router are away from appliances (such as microwave
ovens, refrigerators, electronic devices, etc.) to avoid signal interference.
• If you’re using a VPN, make sure it’s turned o while setting up your tower fan.
• Disable portal authentication for your Wi-Fi network. If portal authentication is en-
abled, the tower fan will not be able to access your Wi-Fi network, and setup will fail.
My smart tower fan is oine.
• Make sure the tower fan is plugged in and has power, then refresh the VeSync menu
by swiping down on the screen.
• Make sure your router is connected to the internet and your phone’s network
connection is working.
• Delete the oine tower fan from the VeSync app. Press and hold your device’s icon,
then tap Delete. Reconfigure the tower fan with the VeSync app.
Note: Portal authentication means that you need to sign in to your Wi-Fi network through
a web page before you can use the Internet.
Note: Power outages, internet outages, or changing Wi-Fi routers may cause the tower fan
to go oine.
FEDERAL COMMUNICATION COMMISSION
INTERFERENCE STATEMENT – PART 15
FCC SDOC SUPPLIER’S DECLARATION
OF CONFORMITY
FCC RADIATION EXPOSURE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Arovast Corporation hereby declares that this equipment is in compliance with FCC requirements.
The declaration of conformity may be consulted in the support section of our website, accessible
from www.levoit.com
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF exposure
compliance. To maintain compliance with FCC RF exposure compliance requirements, please
follow operation instructions as documented in this manual. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter. This equipment should
be installed and operated with a minimum distance of 20 cm between the radiator and your
body. The availability of some specific channels and/or operational frequency bands are country
dependent and are firmware programmed at the factory to match the intended destination. The
firmware setting is not accessible by the end user.
18 19
Product Name Classic 36-Inch
Smart Tower Fan
Model LTF-F362S-WUSR
Date of Purchase
Order ID
LIMITED WARRANTY INFORMATION
Levoit Limited Product Warranty
Register your products at
https://warranty.levoit.com/warranty to stay up to date
with important product information such as product
updates, limited warranties, usage and maintenance
recommendations, and notifications concerning safety
warnings or product recalls. Registration is not required to
claim your limited warranty.
Two (2) Year Limited Consumer Product Warranty
Arovast Corporation (“Arovast”) warrants that the product
shall be free from defects in material and workmanship for
a period of 2 years from the date of original purchase
(“Limited Warranty Period”), provided the product was used
in accordance with its use and care instructions (e.g., in the
intended environment and under normal circumstances).
Your Limited Warranty Benefits
During the Limited Warranty Period and subject to this
limited Warranty Policy, Arovast will, in its sole and
exclusive discretion, either (i) refund the purchase price
if the purchase was made directly from the online Levoit
store, (ii) repair any defects in material or workmanship,
(iii) replace the product with another product of equal or
greater value, or (iv) provide store credit in the amount of
the purchase price.
Who is Covered?
This limited warranty extends only to the original consumer
purchaser of the product and is not transferable to any
subsequent owner of the product, regardless of whether
the product transferred ownership during the specified
term of the limited warranty. The original consumer
purchaser must provide verification of the defect or
malfunction and proof of the date of purchase to claim the
Limited Warranty Benefits.
Be Aware of Unauthorized Dealers or Sellers
This limited warranty does not extend to products
purchased from unauthorized dealers or sellers. Arovast’s
limited warranty only extends to products purchased from
authorized dealers or sellers that are subject to Arovast’s
quality controls and have agreed to follow its quality
controls. Please be aware, products purchased from an
unauthorized website or dealer may be counterfeit, used,
defective, or may not be designed for use in your country.
You can protect yourself and your products by making sure
you only purchase from Arovast or its authorized dealers.
If you have any questions about a specific seller, or if
you think you may have purchased your product from an
unauthorized seller, please contact our Customer Support
Team via [email protected]
What’s Not Covered?
• Normal wear and tear, including parts that might
wear out over time (e.g., batteries, filters, cleaning
brush, essential oil pads, etc.).
• If the proof-of-purchase has been altered in any
way or is made illegible.
• If the model number, serial number or production
date code on the product has been altered,
removed or made illegible.
• If the product has been modified from its
original condition.
• If the product has not been used in accordance with
directions and instructions in the user manual.
• Damages caused by connecting peripherals,
additional equipment or accessories other than
those recommended in the user manual.
• Damages or defects caused by accident, abuse,
misuse, or improper or inadequate maintenance.
• Damages or defects caused by service or repair of
the product performed by an unauthorized service
provider or by anyone other than Arovast.
• Damages or defects occurring during commercial
use, rental use, or any use for which the product is
not intended.
• If the unit has been damaged, including but not
limited to damage by animals, lightning, abnormal
voltage, fire, natural disaster, transportation,
dishwasher, or water (unless the user manual
expressly states that the product is dishwasher-safe).
• Incidental and consequential damages.
• Damages or defects exceeding the cost of
the product.
Claiming Your Limited Warranty Service in 5 Simple
Steps:
1. Make sure your product is within the specified
limited warranty period.
2. Make sure you have a copy of the invoice and order
ID or proof-of-purchase.
3. Make sure you have your product. DO NOT dispose
of your product before contacting us.
4. Contact our Customer Support Team via support@
levoit.com
5. Once our Customer Support Team has approved
your request, please return the product with a copy
of the invoice and order ID.
Sole and Exclusive Remedy
THE FOREGOING LIMITED WARRANTY CONSTITUTES
AROVAST CORPORATION’S EXCLUSIVE LIABILITY, AND
YOUR SOLE AND EXCLUSIVE REMEDY, FOR ANY BREACH
OF ANY WARRANTY OR OTHER NONCONFORMITY OF
THE PRODUCT COVERED BY THIS LIMITED PRODUCT
WARRANTY STATEMENT. THIS LIMITED WARRANTY IS
EXCLUSIVE, AND IN LIEU OF ALL OTHER WARRANTIES.
NO EMPLOYEE OF AROVAST CORPORATION OR
ANY OTHER PARTY IS AUTHORIZED TO MAKE ANY
WARRANTY IN ADDITION TO THE LIMITED WARRANTY IN
THIS LIMITED PRODUCT WARRANTY STATEMENT.
Disclaimer of Limited Warranties
TO THE FULLEST EXTENT PROVIDED BY APPLICABLE
LAW, EXCEPT AS WARRANTED IN THIS LIMITED PRODUCT
WARRANTY POLICY, AROVAST CORPORATION PROVIDES
THE PRODUCTS YOU PURCHASE FROM AROVAST
CORPORATION “AS IS” AND AROVAST CORPORATION
HEREBY DISCLAIMS ALL WARRANTIES OF ANY KIND,
WHETHER EXPRESS OR IMPLIED, STATUTORY, OR
OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY
WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT,
AND FITNESS FOR PARTICULAR PURPOSE.
Limitations of Liability
TO THE FULLEST EXTENT PROVIDED BY APPLICABLE
LAW, IN NO EVENT WILL AROVAST CORPORATION, ITS
AFFILIATES, OR THEIR LICENSORS, SERVICE PROVIDERS,
EMPLOYEES, AGENTS, OFFICERS, OR DIRECTORS BE
LIABLE FOR:
(a) DAMAGES OF ANY KIND ARISING OUT OF OR IN
CONNECTION WITH PRODUCTS PURCHASED FROM
AROVAST CORPORATION IN EXCESS OF THE PURCHASE
PRICE PAID BY THE PURCHASER FOR SUCH PRODUCTS, OR
(b) INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR
PUNITIVE DAMAGES EVEN IF AROVAST CORPORATION
OR ONE OF ITS SUPPLIERS HAS BEEN ADVISED OF THE
POSSIBILITY OR LIKELIHOOD OF SUCH DAMAGES.
AND REGARDLESS OF WHETHER CAUSED BY TORT
(INCLUDING NEGLIGENCE), BREACH OF CONTRACT,
OR OTHERWISE. OUR LIABILITY SHALL UNDER NO
CIRCUMSTANCES EXCEED THE ACTUAL AMOUNT PAID
BY YOU FOR THE DEFECTIVE PRODUCT, NOR SHALL
WE UNDER ANY CIRCUMSTANCES BE LIABLE FOR ANY
CONSEQUENTIAL, INCIDENTAL, SPECIAL OR PUNITIVE
DAMAGES OR LOSSES, WHETHER DIRECT OR INDIRECT.
EXCEPT AS COVERED BY THIS LIMITED PRODUCT
WARRANTY STATEMENT, AROVAST CORPORATION
SHALL NOT BE LIABLE FOR COSTS ASSOCIATED
WITH THE REPLACEMENT OR REPAIR OF PRODUCTS
PURCHASED FROM IT, INCLUDING, BUT NOT LIMITED TO,
LABOR, INSTALLATION, OR OTHER COSTS INCURRED BY
THE USER AND, IN PARTICULAR, ANY COSTS RELATING
TO THE REMOVAL OR REPLACEMENT OF ANY PRODUCT.
OTHER RIGHTS YOU MAY HAVE
SOME JURISDICTIONS DO NOT ALLOW FOR: (1)
EXCLUSION OF IMPLIED WARRANTIES; (2) LIMITATION
ON THE DURATION OF IMPLIED WARRANTIES; AND/
OR (3) EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES; SO THE DISCLAIMERS
IN THIS POLICY MAY NOT APPLY TO YOU. IN THESE
JURISDICTIONS YOU HAVE ONLY THE IMPLIED
WARRANTIES THAT ARE EXPRESSLY REQUIRED TO BE
PROVIDED IN ACCORDANCE WITH APPLICABLE LAW.
THE LIMITATIONS OF WARRANTIES, LIABILITY, AND
REMEDIES APPLY TO THE MAXIMUM EXTENT PERMITTED
BY LAW.
ALTHOUGH THIS LIMITED WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS
IN YOUR JURISDICTION. THIS STATEMENT OF LIMITED
WARRANTY IS SUBJECT TO APPLICABLE LAWS THAT
APPLY TO YOU AND THE PRODUCT. PLEASE REVIEW THE
LAWS IN YOUR JURISDICTION TO UNDERSTAND YOUR
RIGHTS FULLY.
CHANGES TO THIS POLICY
We may change the terms and availability of this
limited warranty at our discretion, but any changes will
not be retroactive.
This warranty is made by:
AROVAST CORPORATION
1202 N. Miller St., Suite A
Anaheim, CA 92806, USA
ATTRIBUTIONS
App Store® is a trademark of Apple Inc.
Google, Android, and Google Play are trademarks of
Google LLC.
Wi-Fi® is a registered trademark of Wi-Fi Alliance®.
Amazon, Alexa and all related logos are trademarks of
Amazon.com, Inc. or its aliates.
iOS is a registered trademark of Cisco Systems, Inc. and/or
its aliates in the United States and certain other countries.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by Arovast Corporation is under license.
Other trademarks and trade names are those of their
respective owners.
CUSTOMER SUPPORT
If you have any questions or concerns about
your new product, please contact our helpful
Customer Support Team.
Arovast Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806, USA
Email: support@levoit.com
Toll-Free: 1-888-726-8520
Mon–Fri, 9:00 am–5:00 pm PST/PDT
Support Hours
*Please have your order invoice and order ID
ready before contacting Customer Support.
18 19
Product Name Classic 36-Inch
Smart Tower Fan
Model LTF-F362S-WUSR
Date of Purchase
Order ID
LIMITED WARRANTY INFORMATION
Levoit Limited Product Warranty
Register your products at
https://warranty.levoit.com/warranty to stay up to date
with important product information such as product
updates, limited warranties, usage and maintenance
recommendations, and notifications concerning safety
warnings or product recalls. Registration is not required to
claim your limited warranty.
Two (2) Year Limited Consumer Product Warranty
Arovast Corporation (“Arovast”) warrants that the product
shall be free from defects in material and workmanship for
a period of 2 years from the date of original purchase
(“Limited Warranty Period”), provided the product was used
in accordance with its use and care instructions (e.g., in the
intended environment and under normal circumstances).
Your Limited Warranty Benefits
During the Limited Warranty Period and subject to this
limited Warranty Policy, Arovast will, in its sole and
exclusive discretion, either (i) refund the purchase price
if the purchase was made directly from the online Levoit
store, (ii) repair any defects in material or workmanship,
(iii) replace the product with another product of equal or
greater value, or (iv) provide store credit in the amount of
the purchase price.
Who is Covered?
This limited warranty extends only to the original consumer
purchaser of the product and is not transferable to any
subsequent owner of the product, regardless of whether
the product transferred ownership during the specified
term of the limited warranty. The original consumer
purchaser must provide verification of the defect or
malfunction and proof of the date of purchase to claim the
Limited Warranty Benefits.
Be Aware of Unauthorized Dealers or Sellers
This limited warranty does not extend to products
purchased from unauthorized dealers or sellers. Arovast’s
limited warranty only extends to products purchased from
authorized dealers or sellers that are subject to Arovast’s
quality controls and have agreed to follow its quality
controls. Please be aware, products purchased from an
unauthorized website or dealer may be counterfeit, used,
defective, or may not be designed for use in your country.
You can protect yourself and your products by making sure
you only purchase from Arovast or its authorized dealers.
If you have any questions about a specific seller, or if
you think you may have purchased your product from an
unauthorized seller, please contact our Customer Support
Team via support@levoit.com
What’s Not Covered?
• Normal wear and tear, including parts that might
wear out over time (e.g., batteries, filters, cleaning
brush, essential oil pads, etc.).
• If the proof-of-purchase has been altered in any
way or is made illegible.
• If the model number, serial number or production
date code on the product has been altered,
removed or made illegible.
• If the product has been modified from its
original condition.
• If the product has not been used in accordance with
directions and instructions in the user manual.
• Damages caused by connecting peripherals,
additional equipment or accessories other than
those recommended in the user manual.
• Damages or defects caused by accident, abuse,
misuse, or improper or inadequate maintenance.
• Damages or defects caused by service or repair of
the product performed by an unauthorized service
provider or by anyone other than Arovast.
• Damages or defects occurring during commercial
use, rental use, or any use for which the product is
not intended.
• If the unit has been damaged, including but not
limited to damage by animals, lightning, abnormal
voltage, fire, natural disaster, transportation,
dishwasher, or water (unless the user manual
expressly states that the product is dishwasher-safe).
• Incidental and consequential damages.
• Damages or defects exceeding the cost of
the product.
Claiming Your Limited Warranty Service in 5 Simple
Steps:
1. Make sure your product is within the specified
limited warranty period.
2. Make sure you have a copy of the invoice and order
ID or proof-of-purchase.
3. Make sure you have your product. DO NOT dispose
of your product before contacting us.
4. Contact our Customer Support Team via support@
levoit.com
5. Once our Customer Support Team has approved
your request, please return the product with a copy
of the invoice and order ID.
Sole and Exclusive Remedy
THE FOREGOING LIMITED WARRANTY CONSTITUTES
AROVAST CORPORATION’S EXCLUSIVE LIABILITY, AND
YOUR SOLE AND EXCLUSIVE REMEDY, FOR ANY BREACH
OF ANY WARRANTY OR OTHER NONCONFORMITY OF
THE PRODUCT COVERED BY THIS LIMITED PRODUCT
WARRANTY STATEMENT. THIS LIMITED WARRANTY IS
EXCLUSIVE, AND IN LIEU OF ALL OTHER WARRANTIES.
NO EMPLOYEE OF AROVAST CORPORATION OR
ANY OTHER PARTY IS AUTHORIZED TO MAKE ANY
WARRANTY IN ADDITION TO THE LIMITED WARRANTY IN
THIS LIMITED PRODUCT WARRANTY STATEMENT.
Disclaimer of Limited Warranties
TO THE FULLEST EXTENT PROVIDED BY APPLICABLE
LAW, EXCEPT AS WARRANTED IN THIS LIMITED PRODUCT
WARRANTY POLICY, AROVAST CORPORATION PROVIDES
THE PRODUCTS YOU PURCHASE FROM AROVAST
CORPORATION “AS IS” AND AROVAST CORPORATION
HEREBY DISCLAIMS ALL WARRANTIES OF ANY KIND,
WHETHER EXPRESS OR IMPLIED, STATUTORY, OR
OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY
WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT,
AND FITNESS FOR PARTICULAR PURPOSE.
Limitations of Liability
TO THE FULLEST EXTENT PROVIDED BY APPLICABLE
LAW, IN NO EVENT WILL AROVAST CORPORATION, ITS
AFFILIATES, OR THEIR LICENSORS, SERVICE PROVIDERS,
EMPLOYEES, AGENTS, OFFICERS, OR DIRECTORS BE
LIABLE FOR:
(a) DAMAGES OF ANY KIND ARISING OUT OF OR IN
CONNECTION WITH PRODUCTS PURCHASED FROM
AROVAST CORPORATION IN EXCESS OF THE PURCHASE
PRICE PAID BY THE PURCHASER FOR SUCH PRODUCTS, OR
(b) INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR
PUNITIVE DAMAGES EVEN IF AROVAST CORPORATION
OR ONE OF ITS SUPPLIERS HAS BEEN ADVISED OF THE
POSSIBILITY OR LIKELIHOOD OF SUCH DAMAGES.
AND REGARDLESS OF WHETHER CAUSED BY TORT
(INCLUDING NEGLIGENCE), BREACH OF CONTRACT,
OR OTHERWISE. OUR LIABILITY SHALL UNDER NO
CIRCUMSTANCES EXCEED THE ACTUAL AMOUNT PAID
BY YOU FOR THE DEFECTIVE PRODUCT, NOR SHALL
WE UNDER ANY CIRCUMSTANCES BE LIABLE FOR ANY
CONSEQUENTIAL, INCIDENTAL, SPECIAL OR PUNITIVE
DAMAGES OR LOSSES, WHETHER DIRECT OR INDIRECT.
EXCEPT AS COVERED BY THIS LIMITED PRODUCT
WARRANTY STATEMENT, AROVAST CORPORATION
SHALL NOT BE LIABLE FOR COSTS ASSOCIATED
WITH THE REPLACEMENT OR REPAIR OF PRODUCTS
PURCHASED FROM IT, INCLUDING, BUT NOT LIMITED TO,
LABOR, INSTALLATION, OR OTHER COSTS INCURRED BY
THE USER AND, IN PARTICULAR, ANY COSTS RELATING
TO THE REMOVAL OR REPLACEMENT OF ANY PRODUCT.
OTHER RIGHTS YOU MAY HAVE
SOME JURISDICTIONS DO NOT ALLOW FOR: (1)
EXCLUSION OF IMPLIED WARRANTIES; (2) LIMITATION
ON THE DURATION OF IMPLIED WARRANTIES; AND/
OR (3) EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES; SO THE DISCLAIMERS
IN THIS POLICY MAY NOT APPLY TO YOU. IN THESE
JURISDICTIONS YOU HAVE ONLY THE IMPLIED
WARRANTIES THAT ARE EXPRESSLY REQUIRED TO BE
PROVIDED IN ACCORDANCE WITH APPLICABLE LAW.
THE LIMITATIONS OF WARRANTIES, LIABILITY, AND
REMEDIES APPLY TO THE MAXIMUM EXTENT PERMITTED
BY LAW.
ALTHOUGH THIS LIMITED WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS
IN YOUR JURISDICTION. THIS STATEMENT OF LIMITED
WARRANTY IS SUBJECT TO APPLICABLE LAWS THAT
APPLY TO YOU AND THE PRODUCT. PLEASE REVIEW THE
LAWS IN YOUR JURISDICTION TO UNDERSTAND YOUR
RIGHTS FULLY.
CHANGES TO THIS POLICY
We may change the terms and availability of this
limited warranty at our discretion, but any changes will
not be retroactive.
This warranty is made by:
AROVAST CORPORATION
1202 N. Miller St., Suite A
Anaheim, CA 92806, USA
ATTRIBUTIONS
App Store® is a trademark of Apple Inc.
Google, Android, and Google Play are trademarks of
Google LLC.
Wi-Fi® is a registered trademark of Wi-Fi Alliance®.
Amazon, Alexa and all related logos are trademarks of
Amazon.com, Inc. or its aliates.
iOS is a registered trademark of Cisco Systems, Inc. and/or
its aliates in the United States and certain other countries.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by Arovast Corporation is under license.
Other trademarks and trade names are those of their
respective owners.
CUSTOMER SUPPORT
If you have any questions or concerns about
your new product, please contact our helpful
Customer Support Team.
Arovast Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806, USA
Email: [email protected]
Toll-Free: 1-888-726-8520
Mon–Fri, 9:00 am–5:00 pm PST/PDT
Support Hours
*Please have your order invoice and order ID
ready before contacting Customer Support.
MFAC_ LPDV_2312_LTF-F362S-WUSR
