Loading ...
Loading ...
Loading ...
16 WB26BCI STRAIGHT SHAFT TRIMMER & BRUSH CUTTER
Long-term Storage
• Remove the fuel cap, tip the unit and drain the fuel into an approved container. Reinstall the
fuel cap.
• Start the engine and allow it to run until it stalls. This ensures that all fuel has been drained from
the carburetor.
• Allow the engine to cool. Remove the spark plug and put 5 drops of any high-quality motor oil
or 2-cycle oil into the cylinder. Pull the starter rope slowly to distribute the oil. Reinstall the
spark plug.
• Thoroughly clean the unit and inspect it for any loose or damaged parts. Repair or replace dam-
aged parts and tighten loose screws, nuts or bolts.
Preparing the Unit for Use after Long-term Storage
• Remove the spark plug. Tip the unit and drain all of the oil from the cylinder into an approved
container. Reinstall the spark plug.
NOTE: Do not use fuel that has been stored for more than 30 days. Dispose of old fuel and oil
according to federal, state and local regulations.
Loading ...
Loading ...
Loading ...