Loading ...
Loading ...
Loading ...
Power Analyzers
Specifications
71
Measurement ..................................................... IEC 61010-2-030: CAT IV 600/CAT III 1000 V
Electromagnetic Compatibility (EMC)
International........................................................IEC 61326-1: Industrial Electromagnetic Environment;
IEC 61326-2-2，CISPR 11: Group 1, Class A
Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is
necessary for the internal function of the equipment itself.
Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a
low-voltage power supply network that supplies buildings used for domestic purposes. There may be potential
difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated
disturbances.
Caution: This equipment is not intended for use in residential environments and may not provide adequate
protection to radio reception in such environments.
Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test
object.
Korea (KCC)....................................................... Class A Equipment
(Industrial Broadcasting & Communication Equipment)
Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user
should take notice of it. This equipment is intended for use in business environments and not to be used in homes.
USA (FCC) ......................................................... 47 CFR 15 subpart B.
This product is considered an exempt device per clause 15.103.
Electrical Specifications
Modules
NORMA 6003 .................................................. 3 Voltage + 3 Current
NORMA6003+ ................................................3 Voltage + 3 Current + 1 Motor
NORMA 6004 ................................................. 4 Voltage + 4 Current
NORMA 6004+ ............................................... 4 Voltage + 4 Current + 1 Motor
Sample Rate ......................................................200 kHz
Data Update Rate .............................................. 100 ms, 200 ms, 500 ms, 1 s
Voltage
Range ................................................................ 10 V, 100 V, 1000 V
Crest Factor ....................................................... CF ≤2
Overload Capacity.............................................. 10 % overload
Input Impedance ................................................2 MΩ / 10 pF (Typical)
Temperature Coefficient .................................... 0.05 x (Spec)/K @ <18°C or >28°C
Bandwidth .......................................................... 1000 V range: 500 kHz
100 V range: 200 kHz
10 V range: 100 kHz
Accuracy
Accuracy (% reading + % range)
Range DC
AC
10 Hz to 1 kHz 10 kHz
1000 V 0.1 + 0.1 0.1 + 0.1 5 + 0.5
100 V 0.1 + 0.1 0.1 + 0.1 5 + 0.5
10 V 0.1+0.2 0.1 + 0.2 5 + 0.5
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...