FLUKE 718 30G User Manual for the Fluke 718-30US Pressure Calibrator with Pressure Vacuum Pump, -12 to 30 PSI

Loading ...

718 Series

Users Manual

Table 2. Safety Information (cont.)

XW Warning

• To avoid false readings, which could lead to possible electric shock or personal injury, replace the

battery as soon as the battery indicator

appears.

• To avoid a violent release of pressure in a pressurized system, shut off the valve and slowly bleed off

the pressure before you attach or detach the internal pressure sensor or pressure module fitting to the

pressure line.

• To avoid over pressure damages, do not apply pressure that exceeds the limits listed in the Pressure

Specifications table in the “Specifications” section.

• To avoid mechanically damaging the Calibrator, do not apply torque between the pressure fitting and

the Calibrator case. See Figure 1 for the proper use of tools.

• To avoid misleading readings, disconnect the pressure module connector at the Calibrator.

• To avoid damage to the pressure module, refer to the related Instruction Sheet.

• To avoid damage to the pump, use with dry air and non-corrosive gases only. Check test leads for

continuity before using. Inspect Calibrator for cracks or damage, do not use the probes if they are

damaged or show high resistance.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct

.com

Loading ...

FLUKE 718 30G 718-30US Pressure Calibrator with Pressure Vacuum Pump, -12 to 30 PSI