Loading ...
Loading ...
Loading ...
11
PROBLEM POSSIBLE CAUSES WHAT TO DO
Turning the knob
does not turn
on the dryer.
Fault with household power
supply.
Try plugging in and turning on another
electrical appliance.
Pressing
‘Start / Pause’
does not start the
drying cycle.
Dryer could be displaying a user
warning or fault code.
Refer to Section 10.
‘Delay’ function is set.
Refer to Section 4”Control panel” for
more information.
Dryer keeps
stopping and
starting.
The ‘Anti-crease’ option has
been selected.
Dryer stops
working mid-cycle.
Power failure. Turn the knob and restart the desired
cycle.
Dryer has been paused.
Press the ‘Start / Pause’ button to restart
the cycle.
Dryer door is open. Ensure the door is firmly shut.
Dryer is taking too
long/results were
not satisfactory.
Drying cycle selected not
appropriate for the load.
Select an appropriate cycle for the load.
Selected drying temp, not
appropriate for the load.
Select a higher drying temp.
Dryer overloaded for the cycle. Some cycles have a lower max. load size.
Try dividing the load in half and dry
half at a time.
Lint filter is blocked. Clean the lint filter.
Load overly wet at the start of
cycle.
Remove more water from the load before
placing it in the dryer, eg select a faster
spin on your washer, a speed appropriate
for your load.
Clothes getting too
hot or damaged.
Cycle selected not appropriate
for the load.
Ensure the cycle selected is appropriate
for items in the load.
Items removed from dryer before
the end of cycle cool down had
finished.
Removing items before cool down may
damage clothing if it is not spread out and
exposed to cooler air once removed from
the dryer.
Refer to Section 4”Control panel” for
more information.
Loading ...
Loading ...
Loading ...