Loading ...
Loading ...
5
Installation
2.Loosen the set screw at the bottom of the sounder and remove the front panel.
3.Secure the sounder with other three screws.
4.Fix the front panel on the sounder body. Tighten the set screw to complete the installation.
-The additional force shall be equal to three times the weight of the equipment but not
less than 50N. The equipment and its associated mounting means shall remain secure
during the installation. After the installation, the equipment, including any associated
mounting plate, shall not be damaged.
-Install the device on the place with nonammable surface, such as concrete wall.
!
3
1. Check signal strength and select tinstallation place
Enter the signal checking mode by operating on the control panel.
Signal indicator turns green for 3 s: Strong.
Signal indicator turns orange for 3 s: Medium.
Signal indicator turns red for 3 s: Weak.
Signal indicator ashes red for 3 s: Lost.
Loading ...