Loading ...
Loading ...
Loading ...
4
1. Bury an angle steel or steel pipe (≥ 0.5 m) into the earth.
2. Weld one end of the grounding cable to the angle steel or steel
pipe and embalm the welding point via electroplating or coating.
3. Connect the other end of the grounding cable to the grounding
terminal.
Grounding with Angle Steel
3.2 Connect RJ45 Port
Use a network cable to connect the device to the RJ45 port of a
peer device such as network camera (IPC), network video recorder
(NVR), switch, etc.
RJ45 Port Connection
Note
When the device is connected to a network camera (IPC), a
separate power supply is required for the IPC.
4 Device Powering-On
Please use the attached power adapter to power on the device.
Before powering on your device, make sure that:
• The operating power supply is compliant with rated input
standard.
• Port cables and grounding cables are correctly connected.
• If there is outdoor wiring, connect a lightning rod and a
lightening arrester to the cable.