Loading ...
Loading ...
Loading ...
4
4. Setup
Caution! Read all instructions and warnings before installation!
Warning: The charging station tower unit is heavy. Use caution when handling the charging station tower unit.
Do not attempt to unpack, move or install it unassisted. Use extreme caution when handling the charging
station tower unit. Always make sure to follow all handling and installation instructions.
4.1 Unpacking
Use at least two people to unpack the unit.
Note: The charging station tower should be moved close to its installation location inside its shipping container before it is unpacked. For
mobile applications, use the CSTCASTERKIT16 or CSTCASTERKIT20 caster, handle and door accessory kit.
1
Upon unpacking, examine for any additional packing material. Make sure to remove all packing materials from the interior
and exterior of the unit. Save all packing materials for later use, unless you are certain they will not be required. Packing
materials are recyclable.
2
With one person on each side, carefully move the charging station tower unit to a firm, level surface.
3
Examine the charging station tower unit and its contents for any damage or loose parts. Confirm all parts are present. If
anything is missing or damaged, contact Tripp Lite for assistance. Do not attempt to use the charging station tower if it
has been damaged.
4.2 Preparation
The charging station tower unit must be installed in a structurally sound area capable of bearing the weight of the charging
station tower unit, all equipment that will be installed, and any other charging station tower units and/or equipment that will be
installed nearby. Before unpacking, first transport the shipping container close to the final installation location to minimize the
distance you will need to move the charging station tower unit after the protective packaging has been removed. If you plan to
store the charging station tower unit for an extended period before installation, follow the instructions in section 7. Storage,
Service and Cleaning.
Note: The charging station tower must be installed by a qualified technician.
To secure the charging station tower to a wall, you will need:
• Level
• Pencil or other marking device
• Appropriate tools for wall mounting
• Appropriate hardware for wall mounting (not included)
Loading ...
Loading ...
Loading ...