Loading ...
Loading ...
Loading ...
VIVOTEK
77 - User's Manual
Please follow the steps below to set up a prole:
1. Select the Enable to apply these settings at
checkbox.
2. Select the applicable Night mode or Schedule mode.
Please manually enter a range of time if you choose
Schedule mode.
When a span of time is congured using the Schedule
mode, you can configure the Day/Night setting for
controlling the behavior of the IR cut lter during that
time.
3. Configure Exposure control settings in the folowing
columns. Please refer to previous dicussions for
detailed information.
4. Click Save to enable the setting and click Close to exit
the window.
Exposure Prole: (Only available when the IR cut lter is not set to the Auto mode)
If you want to congure another sensor and exposure setting for an individual day/night/schedule mode,
please click Prole mode to open the Prole of exposure settings page as shown below.
Enable to apply these settings at:
Select the mode this prole to apply to the Night mode or Schedule
mode. Please manually enter a range of time if you choose Schedule mode. Then check Save to take
effect.
Exposure mode default gain
Auto 37
Shutter priority BLC - hidden Defog -
disabled
WDR Pro -
disabled
37
Iris priority BLC - hidden Defog -
disabled
WDR Pro -
disabled
37
Manual BLC - hidden Defog -
disabled
WDR Pro -
disabled
ICR mode -
Auto
0
Due to the imaging characteristics, some of the related imaging functions will be disabled when the
Exposure mode is changed. See the table below for details:
Loading ...
Loading ...
Loading ...