Loading ...
Loading ...
Loading ...
37
4.4 Configuring the Wireless Connection
Follow the steps below to set up wireless connection to your GV-Fisheye Camera
(GV-FE5302, GV-FER5700 / 5701 / 12203 and GV-EFER3700-W).
1. To set up the wireless LAN for the first time, power on the camera, connect a standard
network cable and insert a WiFi adapter.
Note: GV-EFER3700-W has a built-in WiFi antenna and supports the WPS function. If your
router doesn’t support WPS, follow the instructions below to set up the wireless connection.
2. An IP address will be automatically assigned to the camera. Use GV IP Device Utility to
search for the device. For details, see 4.2 Looking Up the Dynamic IP Address.
3. Configure the wireless settings.
A. On the Web interface, select Network, select Wireless and Client Mode. This
dialog box appears.
B. Type the Network Name (SSID) or click the Access Point Survey button to search
and select for the available Access Points/wireless stations.
C. Select Ad-Hoc or Infrastructure for the Network type.
D. Select the Authentication Type using the drop-down list. You can also obtain this
information by clicking the Access Point Survey button.
E. Type the WPA-PSK Pre-shared Key or WEP depending on the encryption setting
for the Access Point.
F. Click Apply to save the configuration.
Loading ...
Loading ...
Loading ...