Loading ...
Loading ...
Loading ...
17
5. Open the camera cover by unscrewing the indicated screws.
6. Connect the Ethernet cable.
a. Unplug the LAN / PoE connector and prepare an Ethernet cable with only one RJ-45
connector.
b. Thread the Ethernet cable through the opening into the camera and through the plug and cap
as shown below. Use the supplied ruler to make sure the length of the cable from the opening
to the end of the cable is about 10 cm.
c. Insert the plug into the opening and tighten the cap.
d. Attach the supplied RJ-45 connector to the Ethernet cable, and plug the connector into the
LAN / PoE port.
Loading ...
Loading ...
Loading ...