Loading ...
Loading ...
Loading ...
Operations
English46
Settings
Using
Settings
1.
Tap and hold for 3 seconds.
2. Turn the Navigation dial and select the desired system setting, and then tap .
3. Tap to change or run the selected setting.
NOTE
To return to the main screen, tap again or turn the Navigation dial to select Back and tap .
Water Hardness
Set the water hardness according to your region. The detergent concentration level adjusts automatically
according to the water hardness setting.
1. Tap and hold for 3 seconds.
2. Turn the Navigation dial to select Water Hardness, and then tap .
3. Tap to select the desired setting.
• The default setting for
Water Hardness is Med.. Changing the setting adjusts the amount of detergent
dose.
Water Hardness setting Soft Med. Hard
Amount of detergent
dose
Decreased Normal Increased
AI Pattern
This function saves frequently used cycles and settings. When you turn the function on, the washing
machine remembers the cycles you use most and their settings (Temp., Rinse, Spin) and displays them in
frequency order.
1. Tap and hold for 3 seconds.
2. Turn the Navigation dial to select AI Pattern, and then tap .
3. Tap to select On or Off.
- The default setting is On. Set it to Off if you do not want to use this function.
- When you turn off the function, all the saved data resets.
Calibration
You can run calibration again for accurate weight detection.
1. Tap and hold for 3 seconds.
2. Turn the Navigation dial to select Calibration, and then tap .
- Calibration does not start if the door is not closed properly.
- The drum rotates clockwise and anticlockwise for about 3 minutes.
3. When calibration is complete, the “Calibration complete” message appears on the display and the
washing machine turns off automatically.
Untitled-19 46 2024-03-27 3:27:40
Loading ...
Loading ...
Loading ...