Loading ...
Loading ...
Loading ...
Electrical connection
The appliance is fitted with a plug and must only be connected to a properly installed earthed
socket.
Only a qualified electrician who takes the approriate regulations into account may install the
socket or replace the connecting cable. If the plug is no longer accessible following installation,
an all-pole isolating switch must be present on the installation side with a contact gap of at least
3 mm. Contact protection must be ensured by the installation.
Fuse protection: see instructions for use-technical data.
120Volt, 20amp
receptacle
accepts
only 20
amp
plugs
10
568
755
498
488
572
25
498
Do not hold or carry the appliance by the door handle. The door handle cannot hold
the weight of the appliance and may break off.
1. Carefully push the microwave into the box, making sure that it is in the centre.
2. Open the door and fasten the microwave with the screws that were supplied.
Building in
Fully insert the appliance and centre it.
Do not kink the connecting cable.
Screw the appliance into place.
The gap between the worktop and the appliance must not be closed by
additional battens.
9
Loading ...
Loading ...
Loading ...