Loading ...
Loading ...
Loading ...
8
Starting and Running the Unit
Important: If the unit is brought in from outside in the winter
season, give it a few hours to warm up to room
temperature before plugging it in.
And also after transportation and moving of the unit,
please wait for a least 4 hours then to plug on the unit.
1. Remove the packaging material.
2. Clean the unit thoroughly. Wipe the outside with a soft dry cloth,
the interior with a clean moist cloth.
3. Connect the power cord to a standard wall outlet, you will hear a
beep, which is normal. And the display on the control panel will
revert to actual internal temperature.
4. Do not put wines or beverages into the wine cooler within two
hours after the power on.
Operation Button Panel
There are three buttons and temperature display window on the control panel,
let you operate your unit and reach your desired running way.
Temperature Adjustment
Press two buttons “ ” & “ ” to adjust the temperature to your desired
value. Each pressing, the temperature will change 1 Fahrenheit.
Setting Range: 36-61 Fahrenheit. The default setting is 39 Fahrenheit.
Interior Light Control
The unit has a built-in LED light in the cooling compartment. When you open
the glass door, the LED light will be totally on; again close the door, the LED
light will be off. And also this LED light is controlled by the light button “ ”
on the control panel. Press this button, the LED light will change to half
brightness, then after the glass door is closed, the LED light will be still on. And
if you press “ ” button again, the LED light will recover to normally total
brightness, and it will be off when the glass door is closed. For maximum
energy efficiency, please leave the light off when not viewing your collection.
Note: Wait 3-5 minutes before restarting if you unplug the refrigerator. The unit may
Loading ...
Loading ...
Loading ...