Loading ...
Loading ...
Loading ...
9
fail to operate properly if restarted too quickly.
HOW TO CLEAN
IMPORTANT: Do not clean your unit with flammable fluids. The fumes can
create a fire hazard or explosion.
WARNING: 1.Before maintenance or clean to the unit, be sure to unplug the
unit first.
2.Prohibit to pour down the water or let the whole unit submerge in the water,
or it will wet the inside electrical parts.
Cleaners: Never use harsh, abrasive cleaners, heavy-duty cleaners, or solvents
on any surface.
Exterior: Wipe with damp, sudsy cloth, rinse and dry. For stubborn stains and
for periodic waxing, use silicon wax.
Refrigeration Section: Wash shelves and other removable parts in warm sudsy
water, rinse and dry. Wash interior with baking soda solution (3
tablespoons to 1 liter of water) or warm sudsy water, rinse and dry.
Magnetic Door Seals: Wash with warm sudsy water.
HOW TO INSTALL
This appliance can either stand alone or be built in. The front grille must not be
obstructed.
● Install the unit in a convenient location away from extreme heat and cold
place. This unit should be far away from the heating source, such as stoves,
heater, or radiators, and be prevented from direct sunlight. Allow sufficient
clearance between the unit and sidewall so the door will open without
obstruction.
● Place the unit on a level surface that will be strong enough to support the
unit when it is fully loaded. Not recommended for carpeting or other soft /
uneven surfaces. To level your fridge, adjust the front feet located at the
bottom of the unit.
● For under-counter built-in installation, please following the following
diagram, and leave the enough space for the unit.
Loading ...
Loading ...
Loading ...