Loading ...
Loading ...
Loading ...
52
en Disposal
Disposal
J
Dispose of packaging in an environ
mentallyfriendly manner. This
appliance is labelled in accordance
with European Directive 2012/19/EU
concerning used electrical and
electronic appliances (waste electrical
and electronic equipment – WEEE).
The guideline determines the frame
work for the return and recycling
of used appliances as applicable
throughout the EU. Please ask your
specialist retailer about current
disposal facilities.
Guarantee
The guarantee conditions for this appliance
are as de ned by our representative in the
country in which it is sold. Details regarding
these conditions can be obtained from
the dealer from whom the appliance was
purchased. The bill of sale or receipt must
be produced when making any claim under
the terms of this guarantee.
Changes reserved.
Simple troubleshooting
Problem Cause Solution
Strongly uctuating coee
or milk froth quality (e.g.
uctuation in quantity or
milk froth spraying).
Buildup of limescale in the
appliance.
Descale the appliance accord
ing to the instructions, see the
section “Service programmes”.
The suction pipe is blocked. Clean the suction pipe.
Milk froth quality varies
widely
The quality of the milk froth
depends on the type of milk
or the plantbased alternative
used.
Optimise the result through the
selection of the type of milk or
plantbased drink.
Drinks cannot be
dispensed.
Beverage outlet or one of the
3 connections are blocked.
Clean the beverage outlet and
the connections.
The drink runs out at
the entire outlet during
dispensing.
Lower part of the beverage
outlet is missing.
Attach the lower part, see the
section “Cleaning the milk
system”.
Too little milk froth, none
at all, or the milk system
is not taking in any milk.
Buildup of limescale in the
appliance.
Descale the appliance accord
ing to the instructions, see the
section “Service programmes”.
Beverage outlet or one of the
3 connections are blocked.
Clean the beverage outlet and
the connections.
Milk not suitable for foaming. Do not use milk that has
already been boiled. Use cold
milk with a fat content of at
least 1.5%.
Beverage outlet or the milk
tubes are not correctly
assembled.
Moisten the individual parts and
put them together again.
The suction pipe is blocked. Clean the suction pipe.
Loading ...
Loading ...
Loading ...