Kettle
User Manual
Questions or Concerns?
Mon-Fri, 9:00 am-6:00 pm PST/PDT
[email protected] | (844) 331-7333
Thank You
Specifications
Register Your Purchase
• saki.us/pages/warranty
• 1-844-331-7333
• Scan QR code using mobile device
Kettle 1.75L Model: SK-KTL01
Power Supply AC 120V, 60Hz
Rated Power 1500W
Capacity 60 oz / 1.75 L
Temperature Range 104-212 °F / 40-100 °C
Keep Warm Range 1-60 min
Dimensions 8,5 x 7 x 10,5 in / 21,6 x 17,8 x 26,7 cm
Weight 3,1 lbs / 1,4 kg
Table Of Contents
Important Safeguards 2
Parts Diagram 3
Control Panel Diagram 4
Before First Use 5
Getting to Know Your Kettle 6
Using Your Kettle 7
Preset Temperature Table 8
Cleaning & Care 9
Troubleshooting Guide 10
Warranty 11
Customer Support 12
1
Important Safegurads
Read all instructions. Do not throw away this safety guide.
Before use, please read these safety warnings carefully and use the kettle properly. These
safety warnings are indicated for the safe and proper use of this product, prevent danger
to the user or others, and damage property.
• Do not touch hot surfaces. Use handle or knob.
• To protect against fire, electric shock, and injury
to persons, do not immerse kettle, plug, or cord in
water or other liquid.
• Unplug when not in use and before cleaning.
Allow cooling before putting on or taking off parts.
Contact Customer Support.
• Do not use third-party replacement parts or
accessories, as this may cause injuries.
• Do not operate any appliance with a damaged
cord or plug or after the appliance malfunctions
or has been damaged in any manner. Contact
Customer Support.
• Do not use outdoors.
• Do not place on or near a hot gas or electric
burner or in a heated oven. Always attach the
plug to the appliance first, then plug the cord into
the wall outlet. To disconnect, turn any control to
“off” then remove the plug from a wall outlet.
• Do not use the appliance for other than intended
use. For household use only.
• Do not use your kettle for any purpose other than
described in this manual.
• Not for commercial use. Household use only.
• To avoid burns and risk of personal injury, use
extreme caution when carrying a kettle containing
hot water.
• Do not use the kettle if your hands are wet.
• Position the kettle properly on the power base
before switching on.
• DO NOT HEAT AN EMPTY KETTLE: The concealed
heating element in the bottom of the kettle is
protected by an automatic safety device. If your
kettle is accidentally heated without being filled
or is allowed to boil dry, it will automatically cool
down and then turn off. If this happens, unplug the
kettle, fill it with cold water, and wait a few minutes
before replacing it on the base and plugging it in.
• Use the kettle only with a delivered power base.
• Do not use any other kettle on the delivered base
or any other base with a delivered kettle. Use only
the original, delivered pair together.
• After using the kettle, wait until the kettle has
cooled down before removing the lid.
• To avoid possible steam damage, turn spout
away from walls or cabinets during use.
• Scalding may occur if the lid is removed during
the brewing cycles. If the kettle is overfilled, boiling
water may be ejected.
• Never use your kettle without the parts in place.
• Keep your unit away from flammable materials.
Use on a flat, stable, heat-resistant surface away
from heat sources or liquid. The kettle is only to be
used with the stand provided.
• Warning: Avoid spillage on the connector.
• Warning: Potential injury from misuse.
• Do not remove the lid while the water is boiling.
• This appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of electric
shock, this plug is intended to fit into a polarized
outlet only one way. If the plug does not fit fully
into the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not attempt
to modify the plug in any way.
• Keep the power cord away from hot surfaces.
Do not plug in the power cord or operate the Unit
controls with wet hands.
• Your kettle should only be used with 120V, 60 Hz
electrical systems. Do not plug into another type
of outlet.
• Use a protective pad under the kettle after it has
been heated to prevent damage to surfaces.
• To reduce the risk of fire or electric shock, do
not remove the bottom cover from the base or
disassemble the base or kettle in any way. There
are no user-serviceable parts inside. Repair
should be done by authorized service personnel
only. Opening base or kettle will result in a void of
the one-year warranty.
General Safety
While Boiling
Plug & Cord
Save These Instructions
120V, 60Hz 220-240V
2
Parts Diagram
A
E
B
F
C
D
Kettle Lid
Kettle Base
Kettle Lid Knob
Control Panel
Cool-Touch Kettle Rubber Handle
Pour Spout
A
D
F
B
C
E
3
Control Panel Diagram
A
B
C
D
E
F
G
Power On/Off Button
Temperature Decrease Button
Temperature Increase Button
Preset Selection Button
Temperature Display
Preset Display
Goal Temperature
B CA
F
G
E
D
4
Before First Use
Test Run
Please read all use instructions thoroughly before
turning on and using your kettle.
1. Remove and discard any packaging material, promotional labels,
and tape from the kettle.
2. Remove the the kettle lid and fill the kettle with water to MAX 1.75L line.
3. Close the lid by pressing down on the lid knob until it locks in place.
4. Make sure the kettle base is plugged in, then place the kettle
on the base ensuring that it is fully seated.
5. Press the Preset selection button and select “Boil”. Once “Boil” reading
begin to flash on top of the screen it states that boilng cycle has started.
6. Once the boiling cycle is completed, the kettle will
beep to indicate that it has finished.
7. Lift the kettle off the base and discard the water. Repeat this process
one more time to ensure the kettle is clean and ready for use.
5
Getting To Know Your Kettle
Control Panel Display & Operating Buttons
1. Temperature Display
1. Temperature Display:
4. Power ON/OFF
Live Temperature Readout: When the kettle is placed on the base, the
temperature display will show the current temperature of the water inside.
When a heating cycle is started, the temperature display will show the current
temperature of the water to track progress.
4. Power ON/OFF:
Press to turn on the kettle. The control panel will automatically turn on once pressed.
Press and hold again to turn off the kettle.
2. Manual Temperature Control:
Manually customize the water temperature using the + and - buttons to increase or
decrease by 1°F increments from 104°F to 212°F.
3. Preset Selection:
Press to select between 7 one-touch presets.
Green : 175°F
White : 185°F
Oolong : 195°F
Coffee : 200°F
Black : 205°F
Herbal : 210°F
Boil: 212°F
Automatic Shutoff:
The kettle will automatically power off after 1 hour of inactivity.
Note: The temperature accuracy of the kettle is +/- 3°F.
Note: To change the temperature display from Fahrenheit to Celsius, press and hold
tempereature + and - buttons for 2 seconds.
3. Preset Selection2. Manual Temperature Control
6
Using Your Kettle
Note: ONLY fill the kettle body with water.
DO NOT heat or boil other liquids.
Note: The temperature displayed will
always return to the temperature last
selected when the kettle was in use.
To turn on the kettle, plug the power cord
into the socket. The control panel will
automatically turn on once
plugged in.
Powering On
The kettle will automatically power off after
1 hour of inactivity. To manually power off,
press and hold the POWER ON/OFF button
for 3 seconds.
Powering Off
Auto temperature hold is the kettle’s ability
to maintain desired temperature for 60
minutes after a heating cycle. Once the
kettle reached boiling temperature, the
kettle will beep and automatically activate
auto temperature hold. To indicate that the
auto temperature hold is activated, the red
light ring will start pulsing effect.
Auto Temperature Hold
If the kettle has insufficient water when
starting a heating cycle, the kettle will
automatically switch off to protect from
overheating and causing damage. The
kettle will beep and the temperature
display will read “NO WATER” to signify
that the kettle has boiled dry. Unplug the
kettle and allow to cool for at least 10
minutes before refilling.
Boil Dry Protection
1. Plug in the kettle base. Fill the kettle with
the desired amount of water. Set the
kettle on the kettle base.
2. Select your desired temperature on
the control panel.
Presets: Green, White, Oolaong, Coffee,
Black, Herbal, Boil
Manual: Press +/- buttons to manually set
the temperature in 1°F increments
from 104°F to 212°F.
3. After you selected desired
tempereature/preset on control panel.
You do not have to press any extra buttons.
Kettle will start boiling cycle.
4. When the water has reached the
desired temperature, the kettle will beep
and automatically switch on the auto
temperature hold function. The kettle will
maintain the desired temperature for
60 minutes.
Heating Water
Note: To mute the kettle, press and hold
the tempereature + and for 3 seconds.
To indicate the kettle is muted, icon will
read on the temperature display
7
Presets Temperature Table
Preset Given Temperature
Recommended
Drink Types
Ideal Range
For Manual Control
Screen Reads
Green Tea 175°F (80°C)
Matcha
Sencha
Gyokuro
Jasmine
Gunpowder
160°F-175°F
(70°C-80°C)
Green
White Tea 185°F (85°C) Most White Teas
180°F-190°F
(80°C-90°C)
White
Oolong Tea 195°F (91°C) Most Oolong Teas
195°F-205°F
(90°C-95°C)
Oolong
Coffee 200°F (93°C)
French Press
Pour Over
Instant Coffee
195°F-205°F
(90°C-95°C)
Coffee
Black Tea 205°F (96°C)
Pu’erh
Chai
Black Tea With Milk
195°F-205°F
(90°C-95°C)
Black
Herbal Tea 210°F (99°C)
Fruit Teas
Rooibos
Peppermint
210°F (99°C) Herbal
Boil 212°F (100°C)
Hot Chocoloate
Oatmeal
Instant Soup
212°F (100°C) Boil
Warning: This table includes recommended guidelines. The ideal temperature ranges
may vary according to personal preference. Experiment with your favorite tea/coffee
and adjust the temperatures and steep times to suit personal taste.
Note: ONLY fill the kettle body with water. DO NOT heat or boil other liquids.
8
Cleaning & Care
Warning: NEVER immerse the kettle or
kettle base in water.
Warning: Do not use chemicals or
abrasive cleaners internally or externally.
1. Unplug your kettle and allow it to cool
before cleaning.
2. Wipe the kettle and power base with a
soft damp cloth.
3. Be sure that electric socket is kept dry.
4. Dry all parts after every use.
The kettle will not work properly if it is not
descaled regularly. Regular descaling can
increase the life of the kettle, allowing it to
boil water faster and with less energy.
Scale is a naturally occurring buildup of
mineral deposits caused by impurities
in water, especially hard water. For best
performance, descale the kettle every
4-8 weeks or whenever scale buildup is
present inside.
Descaling can be completed with a
descaling solutions specifically designed
for kettles. Follow the directions on the
descaling solution package
OR
1. Fill the kettle with equal parts water
and white vinegar.
2. Let sit for 30 minutes.
3. Discard solution and rinse kettle
thoroughly with clean water.
4. Repeat this process until all deposits
are removed.
Descaling
9
Troubleshooting Guide
• Make sure the power cord is securely plugged into the socket.
• Insert the power cord into a different socket
• Reset the circuit breaker if necessary.
The kettle base won’t turn on.
• The overheat control may have tripped. Let the kettle cool down.
• Ensure the kettle is fully seated on the power base.
The kettle is not heating up.
• The kettle may contain too much scale. Refer to the descaling instructions
on page 9 to descale the kettle.
The kettle turns off before
reaching the target temperature.
• There is an insufficient amount of water inside the kettle and the overheat
control may have tripped.
• Unplug the kettle base.
• Add fresh, room temperature water to at least the minimum 0.5 L
marking inside the kettle.
• Let the kettle cool down at least 10 minutes.
• Plug in your kettle base.
• Restart the heating cycle.
Temperature Display Messages:
No Water
10
Limited One-Year Warranty
Product Kettle
Model SK-KTL01
For your own reference, we strongly recommend that
you record your order ID and date of purchase.
Order ID
Date of Purchase
Saki Kitchen Incorporation warrants this product
to the original and quality, under normal use and
conditions, for a period of one year from the date
of original purchase.
Saki Kitchen agrees, at our option during the
warranty period, to repair any defect in material
or workmanship or furnish an equal product in
exchange without charge, subject to verification
of the defect or malfunction and proof of the date
of purchase.
There is no other express warranty. This warranty
does not apply:
• If the product has been modified from its original
condition;
• If the product has not been used in accordance
with directions and instructions in the user
manual;
• To damages or defects caused by accident,
abuse, misuse or improper or inadequate
maintenance;
• To damages or defects caused by service
or repair of the product performed by an
unauthorized service provider or by anyone other
than SAKI;
• To damages or defects occurring during
commercial use, rental use, or any use for which
the product is not intended;
• To damages or defects exceeding the cost of the
product.
Saki Kitchen will not be liable for indirect,
incidental, or consequential damages in
connection with the use of the product covered by
this warranty.
This warranty extends only to the original
consumer purchaser of the product and is not
transferable to any subsequent owner of the
product regardless of whether the product is
transferred during the specified term of the
warranty.
This warranty does not extend to products
purchased from unauthorized sellers. Saki
Kitchen’s warranty extends only to products
purchased from authorized sellers that are
subject to Saki Kitchen’s quality controls and have
agreed to follow its quality controls.
All implied warranties are limited to the period of
this limited warranty.
This warranty gives you specific legal rights,
and you may also have other rights which
vary from state to state. Some states do not
allow the exclusion or limitation of incidental or
consequential damages, so the above limitation
or exclusion may not apply to you.
If you discover that your product is defective
within the specified warranty period, please
contact Customer Support via [email protected]
NOT dispose of your product before contacting us.
Once our Customer Support Team has approved
your request, please return the product with a
copy of the invoice and order ID.
Extend Your Warranty by 1 Year
Register your product within 14 days of purchase
at www.saki.us/pages/warranty to extend your
1 - year warranty by an additional year.
Terms & Policy
11
Customer Support
If you have any questions or concerns about your Baristan pour
over kettle , please contact our helpful Customer Support Team.
*Please have your invoice and order ID ready before contacting Costomer Support.
SAKI KITCHEN INC
Support Hours
2323 Main Street, Irvine, CA, 92614
Email: [email protected]
Toll-Free: (844) 331-7333
Mon-Fri, 9:00 am - 5:00 pm PST/PDT
Questions or Concerns?
Mon-Fri, 9:00 am-6:00 pm PST/PDT
[email protected] | (844) 331-7333
