Hikvision DS-K1T342DX User Manual

Loading ...

In order to prevent the mobile phone from geng the data of the access control, you can

enable NFC card to increase the security level of the data.

Enable M1 Card

Enable M1 card and authencateing by presenng M1 card is available.

M1 Card Encrypon

Sector

M1 card encrypon can improve the security level of authencaon.

Enable the funcon and set the encrypon sector. By default, Sector 13 is encrypted. It is

recommended to encrypt sector 13.

Enable EM Card

Enable EM card and authencang by presenng EM card is available.

Note

If the peripheral card reader supports presenng EM card, the funcon is also supported to

enable/disable the EM card funcon.

Enable DESFire Card

The device can read the data from DESFire card when enabling the DESFire card funcon.

DESFire Card Read Content

Aer enable the DESFire card content reading funcon, the device can read the DESFire card

content.

Enable FeliCa Card

The device can read the data from FeliCa card when enabling the FeliCa card funcon.

Set Card Authencaon Parameters

Set the card reading content when authencate via card on the device.

Go to Conguraon → General → Card Authencaon Sengs .

Select a card authencaon mode and click Save.

Full Card No.

All card No. will be read.

Wiegand 26 (3 bytes)

The device will read card via Wiegand 26 protocol (read 3 bytes).

Wiegand 34 (4 bytes)

The device will read card via Wiegand 34 protocol (read 4 bytes).

DS-K1T342 Series Face Recognion Terminal User Manual

141

Loading ...

Hikvision DS-K1T342DX Value Series Face Access Terminal