Loading ...
Loading ...
Loading ...
6
Eureka Customer Service HELPLINE 1-800-282-2886
1. Slide wand onto hand vacuum
until it clicks (Fig. 1).
Push wand into motorized floor
nozzle until it clicks (Fig. 2).
Easy assembly
How to install wall mount
2.
• Choose location near power outlet.
Locate point high enough on wall
to allow wand and motorized floor
nozzle to hang freely.
• Place mount against wall and use
pencil to mark drill holes.
• Drill holes (with 1/4” bit) and insert
drywall anchors. Insert screws
through holes on mount and tighten
until firmly attached(Fig.3).
How to charge battery and
store accessories
Battery indicator lights show
level of charge(Fig. 4):
• Place assembled vacuum cleaner
on wall mount.
• Plug charger into power outlet and
then into charger port on handle(Fig. 4).
• Loop charger cord into clips on
sides of wall mount.
A. Half charged
B. Fully charged
• AB Indicator lights stop blinking when
fully charged.
• Charge battery fully before using for
the first time. This may take up to
six hours.
1
Click!
2
Click!
3
Drywall anchors
Cord
clip
A
B
4
Loading ...
Loading ...
Loading ...