Loading ...
Loading ...
Loading ...
6
EN
4 Using the
humidifier
Switch the humidier on
and o
1 Put the plug in the wall socket.
2 Turn the control knob to low
speed or high speed (g h).
» The speed light and the
humidier are on (g i).
3 Turn the control knob to OFF.
» The speed light is o.
» The humidier is o.
Note
• The humidier releases very ne invisible
mist, so it is normal that you cannot see
the mist.
Water level
When there is not enough water in the
water tank, the speed light will be o
and the humidier stops working. The
control knob stays at the chosen speed.
When you rell water, the humidier will
resume work at the chosen speed.
Note
• It is normal to nd some water left in the
tank.
Rell water
Water level can be observed through
the transparent water tank window.
1 Switch o the humidier and unplug
i
t (g j).
2 Hold by both sides of the upper unit
and lift it up (g b).
3 You can observe the water level
through the transparent water tank
window. Fill the water tank with cold
tap water until the water reaches
the maximum water indication level
(g f).
Note
• When lling water, do not exceed the
maximum water level, or water might leak
from the drain hole and air inlets.
• Do not shake the water tank when
moving it, or water might leak from the
drain hole and air inlets.
• Do not ll water through the air outlets
on top of the humidier.
4 Place the upper unit back onto the
water tank (g g).
Loading ...
Loading ...
Loading ...