Maytag 1865200 Top Load Laundry Pair with MVWP586GW 27" Commercial Grade Residential Top Load Washer and MEDP586KW 27" Electric Dryer

User Manual - Page 7

For 1865200.

PDF File Manual, 40 pages, Read Online | Download pdf file

1865200 photo
Loading ...
Loading ...
Loading ...
7
Turn Cycles knob to choose your wash cycle. For more
information, see “Cycle Guide.”
7.Select CYCLE
8.Select TEMPERATURE
Once you select a cycle, select the desired wash temperature by
turning the Temperature knob to the appropriate setting based on
your load. All rinses are tap cold.
NOTE: Always read and follow fabric care label instructions to
avoid damage to your garments.
Temperature Suggested Fabrics
Hot
Some cold water is added to save
energy. This will be cooler than your
hot water heater setting.
Whites and pastels
Durable garments
Heavy soils
Warm
Some cold water will be added, so this
will be cooler than what your previous
washer provided.
Bright colors
Moderate-to-light
soils
Cool
Warm water may be added to assist
in soil removal and to help dissolve
detergents.
Colors that bleed
or fade
Light soils
Cold
This is the temperature from your faucet.
If your tap cold water is less than
50°F (10°C), warm water may be added
to assist in soil removal and help dissolve
detergent.
Dark colors that
bleed or fade
Light soils
9.Select OPTIONS
Select any other cycle options you may wish to add, if not
previously set. These may be turned off if desired.
NOTE: Not all options are available with all cycles.
10.Press POWER/START/PAUSE to
begin wash cycle
Temperature Suggested Fabrics
Tap Cold
This is the temperature from your faucet.
Dark colors that
bleed or fade
Light soils
Press the POWER/START/PAUSE button to start the wash
cycle. When the cycle has nished, the Done indicator will light.
Promptly remove garments after cycle has completed to avoid
odor, reduce wrinkling, and avoid rusting of metal hooks, zippers,
and snaps.
NOTE: If you press POWER/START/PAUSE to pause cycle, you
must press POWER/START/PAUSE to resume cycle. If you hold
POWER/START/PAUSE for more than 3seconds, it will cancel
your cycle and drain the washer.
Adding a Garment After Cycle Begins
During Soak/Wash, open the lid, add a garment, and close the
lid.
IMPORTANT: If the lid is left open for more than 10minutes, the
water will pump out automatically.
Loading ...
Loading ...
Loading ...