DS-2CD1P47G2-LUF User Manual

Loading ...

Figure 2-10 Set Rule

Oponal: You can set the parameters of mulple areas by repeang the above steps.

For the arming schedule sengs, refer to Set Arming Schedule . For the linkage method sengs,

refer to Linkage Method Sengs .

Click Save.

Set Region Exing Detecon

It is used to detect objects exing from a predened virtual region. If it occurs, the device can take

linkage acons.

Before You Start

●

For certain device models, you need to enable the smart event funcon on VCA Resource page

rst.

●

For the device supporng HEOP, go to VCA → APP to import and enable Smart Event.

Steps

Go to VCA → Smart Event → Region Exing Detecon . For certain device models, you should

go to Conguraon → Event → Smart Event → Region Exing Detecon .

Check Enable.

Select a Region. For the detecon region sengs, refer to

Draw Area .

Set the minimum size and the maximum size for the target to improve detecon accuracy. Only

targets whose size are between the maximum size and the minimum size trigger the detecon.

For the detail sengs, refer to Set Size Filter .

Set the detecon target, sensivity and the target validity.

Network Camera User Manual

Loading ...

Hikvision DS-2CD1P47G2-LUF 4 MP ColorVu Fixed Bullet PT Network Camera