DS-2CD1P47G2-LUF User Manual

Loading ...

Set PIR Alarm

A PIR (Passive Infrared) alarm is triggered when an intruder moves within the detector's eld of

view. The heat energy dissipated by a person, or any other warm blooded creature such as dogs,

cats, etc., can be detected.

Steps

Note

Only certain models support PIR alarm.

Go to Conguraon → Advanced Conguraon → Basic Event → PIR Alarm .

Check Enable PIR Alarm.

Refer to Set Arming Schedule for seng scheduled me. Refer to Linkage Method Sengs for

seng linkage method.

Click Save.

Set Excepon Alarm

Excepon such as network disconnecon can trigger the device to take corresponding acon.

Steps

Go to Conguraon → Event → Basic Event → Excepon .

Select Excepon Type.

HDD Full The HDD storage is full.

HDD Error Error occurs in HDD.

Network Disconnected The device is oine.

IP Address Conicted The IP address of current device is same as that of other device in

the network.

Illegal Login Incorrect user name or password is entered.

Refer to

Linkage Method Sengs for seng linkage method.

Click Save.

Set Alarm Input

Alarm signal from the external device triggers the corresponding acons of the current device.

Before You Start

Make sure the external alarm device is connected. See Quick Start Guide for cable connecon.

Steps

Go to Conguraon → Event → Basic Event → Alarm Input .

Network Camera User Manual

Loading ...

Hikvision DS-2CD1P47G2-LUF 4 MP ColorVu Fixed Bullet PT Network Camera