Loading ...
Loading ...
Loading ...
TiX620, TiX640, TiX660, TiX1000
Users Manual
1-28
Ethernet Cable and AC Adapter
The Ethernet cable is used in order to connect the
thermography camera to the 8-pin LEMO socket (left-
hand side, blue mark).
The 14-pin connector of the ac adapter is plugged into the
right-hand side LEMO socket with the red mark pointing
to the top. See Figure 1-2.
Ethernet
AC Adapter
hvh057.eps
Figure 1-2. Ethernet Cable and AC Adapter
AC Adapter Connection
To operate while permanently connected to a notebook or
PC, the power should be supplied using the ac adapter
(see Figure 1-3) with the 14-pin LEMO connector on
right-hand side socket.
hvh058.eps
Figure 1-3. AC Adapter
When the ac adapter is connected, the camera is
automatically supplied by the ac adapter and no longer by
the rechargeable battery. However, the rechargeable
battery is not charged at the same time.
Operation with Breakout Box
Using the breakout box will expand the connection
options of the thermal imager, see Table 1-8. The
interfaces 2 x analog output, 2 x trigger E/A, PAL/NTSC-
FBAS, as well as the digital RS232 interface are
accessible via the breakout box.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct
.com
Loading ...
Loading ...
Loading ...