Loading ...
Loading ...
Loading ...
Administrator Mode
167
3
3.6.1.11 Crowd Density Monitoring
With Crowd Density Monitoring, an alarm is triggered when the number of people in a
specified area exceeds the defined alarm threshold. Note this function is only applicable to
GV-EBD4813 / 8800 / 8813, GV-BLFC5800, GV-EBFC5800, GV-PTZ5810-IR, GV-TBL4810
/ 8804 / 8810, GV-TDR4803 / 8805, GV-TFD4800, and GV-TVD4810 / 8810.
Select the checkbox next to Crowd Density Monitoring to enable and click
to configure.
Figure 3-53
1. Once enabled, define the detection area on the live view.
2. For Report Interval(s), set the time interval (in seconds) for reporting crowd density data.
3. Under Crowd Density Alarm, set the alarm threshold for Minor Alarm, Major Alarm,
and Critical Alarm. The number of people set for Critical Alarm accounts for the
largest and Minor Alarm the smallest. The value ranges from 1 to 40, and each alarm
will be triggered when the number of people reaches the set threshold.
4. Under Trigger Actions, select
on the desired alarm. See details in Step 6 at the
bottom of 3.6.1.1 Cross Line.
5. For Plan, follow Step 7 at the bottom of 3.6.1.1 Cross Line.
Loading ...
Loading ...
Loading ...