Loading ...
Loading ...
Loading ...
164
3.6.1.9 Human Body Detection
Human Body Detection is used to generate an alarm whenever a human figure appears in
the specified area. Note this function is only applicable to GV-ABL4711, GV-EBD4701 /
4712, GV-TBL4700 / 4711, GV-TDR4703 series, GV-TFD4700, and GV-TVD4700 / 4711.
Figure 3-51
1. In the Snapshot Area, click to add a new detection area.
2. Click and drag the detection area to a desired location.
3. Adjust the detection sensitivity by dragging the Sensitivity slider.
4. Set up Alarm Parameters.
◼ Suppress alarm: After a detection is triggered, the detection will not be reported
within the set time.
◼ Clear alarm: After a detection is triggered,
• If the detection is not triggered within the set time, the detection will be cleared
and the detection can be reported again.
• If the detection is triggered within the set time, the detection will not be cleared
until the suppress alarm time expires. Then the detection can be reported
again.
5. Set up Trigger Actions.
◼ Upload to FTP and Trigger E-mail: Automatically upload snapshots captured to
the specified FTP server and/or send snapshots to the specified e-mail address.
◼ Recording Storage and Image Storage: Automatically save videos and/or
snapshots captured to the selected storage(s).
6. For Enable Plan, follow Step 7 at the bottom of 3.6.1.1 Cross Line.
Loading ...
Loading ...
Loading ...