Loading ...
Loading ...
FUNCTIONS (PB618)
1.HIGH LEVEL INPUT (LOW IMPEDANCE)
If your car stereo does not have RCA output jacks, you can connect the
speaker output from the stereo system to the amplifier.
2.LOW LEVEL INPUT (HIGH IMPEDANCE)
This unit is provided with RCA input jacks for High impedance input.
Couple the RCA input with the car stereo output using RCA type connector
cables.
3.LEVEL CONTROL
Adjusting the control will match the output of the stereo to the amplifier. Turn
the control clockwise for more volume and counter-clockwise for less volume if
there is distortion when the volume of stereo is turned up, turn the control
down.
4.FULLILPF/HPF CROSSOVER SWITCH
For use with normal full range systems, this selector should be set to the
FULL position. If this AMPLIFIER is being utilized to power a CROSSOVER
system, this selector should be set to either the HPF(HI PASS FILTER) or
LPF(LOW PASS FILTER) position to enable the built-in electronic crossover.
S.BASS BOOST CONTROL
The Bass-Boost dial increases the bass signal to the speaker.
6.LOW PASS CONTROL
The LPF 40Hz/350Hz lets you adjust the crossover frequency from 40Hz
to 350Hz, this control is useful only for subwoofers and not you main speakers.
7.HIGH PASS CONTROL
The HPF 80 Hzl2.5KHz lets you adjust the crossover frequency from 80 Hz
to 2.5KHz. lets you set the tweeter speakers.
8.POWER ON LED
Lights up when the remote on system is energized.
3
Loading ...
Loading ...
Loading ...