Loading ...
Loading ...
Loading ...
TESTING AND SPECIFICATIONS
J
1.
After all the connections have been made, turn on your stereo and listen for the
amplifier to turn on. If there are any unusual noises from the speakers then turn
the system off and recheck all wiring.
2. After you have connected your radio or requallzer to the amplifier, you may ad
just the gain control to match the output level of your radio.
(A) Set the volume control on you radio to 2/3 position
(8) Adjust the gain control for an average listening level.
(e) Turn the radio volume all the way down nd listen for background noise.
(D) Start your vehicle and listen for ectrical noise.
(E) Making fine adjustments to the sensitivity can reduce background noise and
Some engine noise.
(F)
CAUTION: Never turn the sensitivity up any farther than you need to get
clear sound at 2/3 volume.
(G) This adjustment only needs to be made once.
15
Loading ...
Loading ...