Loading ...
Loading ...
Loading ...
5
LED LIGHT CODE MATRIX
Flash Pattern LED Light Pattern Mode Available Error Code Function Action
Red & Green
Alternating
TORQUE-SENSE™
Custom Drive Control
Low Battery Voltage
Detection
This tool ensures consistent output over battery discharge and will
alert you when it is time to change the battery.
Install a fully charged M18™ Battery
Red Flash
TORQUE-SENSE™ Double Hit
When enabled, Double-hit Prevention detects if your application is
already fastened. Milwaukee Tool recommends that you operate
the tool with both hands for repeatable double-hit prevention
on your applications. Double-hit prevention cannot correctly
detect 100% of the time. Always rely on visual observation or a
digital torque wrench to be certain your application is in spec.
Educate tool operator of functionality, or
disable in the app if no longer desired
TORQUE-SENSE™ Early Let Go Indicates full fastening cycle was not achieved.
Instruct operator to hold trigger until
full fastening cycle is complete and tool
automatically shuts off
Universal Settings Forward/Reverse Lock Off Indicates tool was operated in direction that was locked out. Instruct operator on tool settings
Red & White
Alternating
TORQUE-SENSE™
Application
Retraining Timer
When enabled, the tool will operate until the inputted application
count is reached. The tool will not operate and LED’s will flash red
and white until tool connection is made. You have the option to
reset the timer, change the application count, or turn off the feature.
Milwaukee Tool recommends that you check your tool’s torque
output on your application regularly with a digital torque wrench to
ensure continued proper tool performance.
Connect tool to the
MILWAUKEE® ONE-KEY™ app,
select the notification and follow prompt
TORQUE-SENSE™
Service Timer – Approaching
Service Interval
(95% Complete)
Indicates your tool is approaching end of life. We recommend
having a replacement tool ready to minimize down time.
Connect tool to the
MILWAUKEE® ONE-KEY™ app,
select the notification and follow prompt
TORQUE-SENSE™
Custom Drive Control
Sensor Error
A sensor malfunction is detected. To ensure repeatable
performance, we require that you send the tool
in for service. Contact 1-800-SAWDUST or visit
Milwaukeetool.com/support to begin service process.
Connect tool to the
MILWAUKEE® ONE-KEY™ app,
select the notification and follow prompt
Green Light
TORQUE-SENSE™
Custom Drive Control
OK Event
Tool has completed its full fastening cycle. Green light only
indicates tool has completed full cycle, not a guarantee of
torque target achieved. To ensure proper output,
validate with a calibrated torque wrench.
No action necessary
Mode Colors
TORQUE-SENSE™
Custom Drive Control
Customizable LED
Indication Lights
Customizable LED lights can be selected and assigned during
tool setup based on preference. For example, lights could indicate
specific mode settings, assigned operator or crew, etc.
No action necessary