Loading ...
Loading ...
Loading ...
3
Digital Torque Wrench
BEGIN TOOL
TRAINING PROCESS
n
10 Training Rundowns required to dial
in tool repeatability
– Tool will automatically shut off
during rundown
– After tool stops, shows green
light, release nger from trigger
– Measure torque applied to application
with a Digital Torque Wrench
– When 10 runs have been successful
and audited, click
"
Submit Training
"
TIP – Use new hardware for each
of the 10 training rundowns
8
COMPLETE RUNDOWN #1
n
When connected to the tool, put your
tool on your application and hold trigger
to complete the rundown
n
Tool will automatically stop and show
a green light when it's rundown
is complete
n
If a red light appears, re-do the
application rundown with new hardware
NOTE – By design, the tool will not get
exactly to your target torque every training
run. TORQUE-SENSE
™
is designed to
go above and below your target torque
during the training process
9
AUDIT RUNDOWN #1
n
Use your Digital Torque Wrench to measure
the amount of torque that your impact
applied on your application
n
An audit value can be taken by loosening or
tightening the bolt, but one needs to ensure
that you note the torque value the instant
the bolt moves
– For the rst rundown, the tool is designed
to reach 50 – 80%
of your target torque
– If red light shows,
re-do the application
n
Input that torque value you just got with the
Digital Torque Wrench into the ‘measured
torque’ line in the MILWAUKEE
®
ONE-KEY
™
app and click
"
Next Rundown
"
10
REPEAT 10 AND 11 UNTIL
YOU HAVE AUDITED 10
BOLTS SUCCESSFULLY
n
We recommend to always use new
hardware on each of your 10 training
runs for best results
n
Always complete a green light rundown
and torque audit before completing
another rundown with the impact wrench
n
Complete this process of fastening,
auditing, and inputting torque into the app
until you have 10 training runs complete
n
The tool will not always get the target
torque exactly, you will notice that it
gets some above and some below
the target torque
11
Loading ...
Loading ...