Loading ...
Loading ...
Loading ...
DS-6700HUHI Series Encoder Quick Start Guide
3
Chapter 2 Installation
2.1 Pre-Installation
The DS-6700HUHI Series Encoder should be installed with care. Please take the following
precautionary steps into consideration before installing the encoder.
1. Keep all liquids away from the Encoder.
2. Install the Encoder in a well-ventilated and dust-free area.
3. Ensure environmental conditions meet factory specifications.
4. Install a manufacturer recommended SD card.
2.2 Installation
During the installation of the Encoder:
1. Use brackets for rack mounting.
2. Ensure there is ample room for audio and video cables.
3. When installing cables, ensure that the bend radius of the cables are no less than five times than
its diameter.
4. Connect both the alarm and RS-485 cable.
5. Allow at least 2cm (≈0.75") of space between racks mounted devices.
6. Ensure the Encoder is grounded.
7. Environmental temperature should be within the range of -10º C to 55º C, 14º F to 131º F.
8. Environmental humidity should be within the range of 10% to 90%.
Loading ...
Loading ...
Loading ...