Forno FFSGS644448 Installation Instructions

Loading ...

STEP 5: Gas Valve

a. Remove control knobs.

b. Using a flat screwdriver, adjust main burner bypass jets screw toward to 1/4 circle for LP until

the flame is normal. For 9,000btu and 15,000btu burners, please refer to fig.1, which is in the

center of valve axis. For 20,000btu burners, please refer to fig.2, which is in the left side of

valve axis.

PLEASE NOTE: If the bypass jets screw is tighten too much, the igniter will go ON when burner is

set to minimum because the gas outlet is too low.

STEP 6: Reconnect Gas and Electrical Supply

Leak testing of the range shall be conducted according to the installation instructions provided with

the range.

Before operating the range after the gas conversion, always check for leaks with a soapy water

solution or other acceptable method in at gas connections installed between the gas inlet pipe of the

range, gas regulator, and the manual shut-off valve.

fig.1

fig.2

Use soapy solutions to check for leakage on all joints.

Loading ...

Forno FFSGS644448 48 Inch Freestanding Gas Range with 8 Italian Defendi Sealed Burners, 6.58 Cu.