Loading ...
Loading ...
Loading ...
Gas Shut-off Valve
Electric Power Supply Requirements
Pressure regulator can withstand
a maximum input pressure of 0.5
psi (3.5 kPa), and is set at 5"
WC outlet pressure when used
on NATURAL GAS and 10" WC
outlet pressure when used on
LIQUID PROPANE.
Pressure Regulator
Gas Shut-off Valve
The supply line must be equipped with an approved external gas shut-off valve located near the range
in an accessible location. Do not block access to the shut-off valve. Refer to the illustration below.
A 3/4" (19
mm) ID gas supply line must be provided to the range. If local codes permit, a certified,
3' (.9 m) long, 1/2" (13
mm
) or 3/4" (19 mm) ID flexible metal appliance connector is recommended to
connect the unit’s 1/2" NPT
(30" & 36") or 3/4" NPT (48") female inlet to the gas supply line. Pipe joint
compounds suitable for use with natural or LP gas should be used.
The appliance and its shut-off valve must be disconnected from the gas supply piping system
during
any pressure testing of the system at test pressures in excess of 0.5 psi (3.5 kPa). The appliance must
be isolated from the gas supply piping system by closing its individual manual shutoff valve during any
pressure testing of the system at test pressures equal to or less than 0.5 psi (3.5 kPa).
15
(not included)
Pressure Regulator
Since service pressure may fluctuate with local demand, every gas cooking range must be equipped
with a pressure regulator on the incoming service line for safe and efficient operation.
The pressure regulator preinstalled on the range has a gas inlet of 1/2" NPT for the 30" and the 36"
or 3/4" NPT for the 48".
Recommended
power outlet area
For reference only, please refer to the real object.
20" 4/5 (530)
26" 4/5 (680)
38" 1/2 (980)
P
GAS INLET
X
Loading ...
Loading ...
Loading ...