Loading ...
Loading ...
Loading ...
Operating
Daily Operating Checklist
Check engine oil.
Clean muer area, air intake screens, and mower deck.
Check brake system.
Check fuel level.
Check under the machine for leaks.
Check safety interlock system.
Check tire pressures.
Check oil level in both transmissions.
Check mulch control open/close operation (if equipped).
Clean mower deck using the washout port after use.
SB31882,00003CD-19-21MAY20
Avoid Damage to Plastic and Painted Surfaces
● Do not wipe plastic parts until they are rinsed rst. Using a dry cloth
causes scratches.
● Insect repellent spray damages plastic and painted surfaces. Do
not spray insect repellent near machine.
● Be careful not to spill fuel on the machine. Fuel damages surfaces.
Wipe up spilled fuel immediately.
● Prolonged exposure to sunlight damages some surfaces.
MP47322,00F4630-19-15APR19
Using Operator Display Unit (If Equipped)
Operator Display Unit
The R-Series machines are equipped with an electronic operator
display unit.
MX101455—UN—04MAY20
Operator Display Unit
A—Engine Diagnostic Indicator
B—Motion Control Levers Neutral Position Indicator
C—Warning Indicator
D—STOP Machine Indicator
E—Mower Engagement Indicator
F—Voltage Indicator
G—Park Brake Indicator
H—Operator Seat Indicator
I—Throttle Indicator
J—Fuel Level Indicator
K—Hourmeter
A Light indicates an engine diagnostic problem. Service is
required. Contact your John Deere Dealer.
B Light alerts operator to return control levers to the neutral
position.
C Light indicates a signicant WARNING. Stop the machine.
D Light indicates to the operator to STOP the machine
immediately.
E Light indicates that the mower blades are engaged.
F Displays the current voltage range.
G Light indicates that the park brake is engaged.
H Light indicates that the operator is seated.
I Displays the current engine throttle range.
J Displays the current fuel level.
K Displays the current operating hours.
Numeric RPM Display
Any R-Series machine with an operator display unit can display the
engine RPM numerically.
MX101508—UN—15MAY20
L—Graphic Display of Engine Speed
M—Numeric Display of RPM
To display the RPM numerically:
● Cycle the control levers out ve times within the rst three seconds
the key switch is ON.
NOTE: Once enabled, the hourmeter will display the engine RPM (M)
numerically. This feature will remain active until the next cycling
of the control levers or cycling of the key switch.
SB31882,00003FD-19-17MAY20
Using the Hour Meter and MowerPlus Fuel Gauge (If
Equipped)
Hour Meter
● The hour meter shows the number of hours the engine has run. The
hour meter does not accumulate hours with the engine o when the
key is in the run position. Use the hour meter to determine when
your machine has reached the recommended service intervals.
● Turn the key to STOP position when not using the machine.
● Hour meter cannot be reset.
Operating
17
Loading ...
Loading ...
Loading ...