Loading ...
Loading ...
Loading ...
for signs of loose hardware or belt damage, such as cuts, fraying,
extreme or unusual wear, discoloration, or abrasion. Replace only
with John Deere-approved replacement parts.
● Layers of heavy clothing can interfere with proper positioning of the
seat belt and can reduce the eectiveness of the seat belt.
SB31882,000049F-19-09JUL20
Rollover Protection System (ROPS) - Use and
Maintenance
● Conforms to ISO21299:2009 for energy absorbing ROPS
requirements.
● Never operate the machine without the ROPS installed.
● DO NOT remove the ROPS.
● The ROPS is an integral and eective safety device. Keep a folding
ROPS in the raised and locked position and use the seat belt when
operating the machine.
● Lower a folding ROPS temporarily only when necessary. Do not
wear the seat belt when folded down.
● Be aware there is no rollover protection when a folded ROPS is in
the down position.
● Be certain that the seat belt can be released quickly in the event of
an emergency.
● Check the area to be mowed and never fold down a folding ROPS
in areas where there are slopes, drop os, ditches, or
embankments or bodies of water.
● Check carefully for overhead clearances (that is, branches,
doorways, electrical wires) before driving under any objects and do
not contact them.
● Keep the ROPS in safe operating condition by periodically
thoroughly inspecting for damage and keeping all mounting
hardware tight. Make certain all parts of the ROPS are installed
correctly if the ROPS structure is loosened or removed for any
reason. All ROPS hardware should be tightened to the proper
torque.
● Replace a damaged ROPS. Do not repair or revise. The protection
provided by the ROPS will be impaired if the ROPS is subjected to
structural damage, is involved in an overturn incident, or is in any
way altered by welding, bending, drilling, or cutting. It must be
replaced to maintain the manufacturer’s certication of the structure
● Any alteration of ROPS must be approved by manufacturer.
● The seat is part of the ROPS safety zone. Replace only with a John
Deere-approved seat.
MX00654,0000200-19-08APR20
Prevent Fires
TS227—UN—15APR13
● Do not mow tall, dry grass or through piles of leaves. Combustible
materials can contact hot components and increase the risk of re.
● Debris can build up anywhere on the machine, especially on
horizontal surfaces. While using your machine, periodically check
for and remove debris, especially in dry or heavy debris conditions,
such as when collecting leaves.
● After operating, completely remove any combustible materials from
equipment before storing. Use compressed air, a leaf blower, or
water to keep the machine clean.
● Allow machine to cool in an open area before storing. Do not park
machine near ammable materials, such as straw, mulch, cloth, or
chemicals. Do not park near an open ame or other sources of
ignition, such as a water heater or furnace.
● Excess lubrication or fuel/oil leaks or spills on the machine can also
provide collection sites for debris. Promptly cleaning up spills and
repairing leaks reduces the potential for debris collection.
● Refer to the Machine Cleanout section for more information on
checking for debris buildup and locations to inspect.
● Always park the machine safely before cleaning or servicing a
machine. See the Parking Safely section.
OUO2005,0000787-19-15FEB20
Parking Safely
Always apply the park brake and remove the key before leaving the
machine unattended. Children or others may attempt to move or
operate an unattended machine.
● Stop the machine on a level surface.
● Disengage mower blades or other attachments.
● Lower attachments to the ground.
● Apply the park brake.
● Stop the engine.
● Remove the key.
● Wait for engine and all moving parts to stop before you leave the
seat.
OUO2005,0000788-19-15FEB20
Additional Safety Information
Towing Loads Safely
● Stopping distance increases with speed and weight of towed load.
Travel slowly and allow extra time and distance to stop.
● Total towed weight must not exceed Towing Capacity stated in
Specications of this manual.
● Excessive towed load can cause loss of traction and loss of control
on slopes. Reduce towed weight when operating on slopes.
● Never allow children or others in or on towed equipment.
● Use only approved hitches. Tow only with a machine that has a
hitch designed for towing. Do not attach towed equipment except at
the approved hitch point.
● Towed equipment increases the risk of rollover on slopes. Refer to
the Operating on Slopes and Near Terrain Hazards section for more
information.
● Do not turn sharply. Use additional caution when turning or
operating on adverse surface conditions. Use care when reversing.
Safe Transportation
Follow instructions in the Transporting Machine on Trailer section.
● Use a full-width loading ramp at least 30 cm (12 in) wider than the
machine, never two separate ramps.
Service and Maintenance
● Proper service and maintenance of the machine is essential.
● Keep all parts in good condition, keep all nuts and bolts tight, and
repair any damage immediately. Stop and inspect the machine
immediately if you strike an object.
● Ensure that all safety devices, discharge chute, and grass catcher
components are in good condition and replace when necessary.
● Understand service procedures thoroughly before working on the
machine. If you do not understand the service procedures or are
Safety
12
Loading ...
Loading ...
Loading ...