Loading ...
Loading ...
Loading ...
VT02, VT04
Users Manual
6
Rechargeable Battery
The VT04 has a rechargeable Li-ion battery.
Note
New batteries are not fully charged. Two to ten normal
charging/discharging cycles may be required before the battery
charges to its maximum capacity.
Before using the VT04 for the first time, charge the battery:
1. Plug the ac power supply into an ac wall outlet.
2. Connect the micro-USB connector to the VT04. See Figure 2.
While the battery is charging,
shows on the display and the
status LED is red. When charged,
shows on the display and the
status LED is green. The typical charge time from 100 % discharged
to 100 % charge is 5 to 6 hours.
Note
Make sure the Product is near room temperature before you connect
it to the charger. See the charging temperature specification. Do not
charge in hot or cold places. Charging in extreme temperatures
reduces the battery pack’s ability to hold a charge.
hak18.eps
Figure 2. Rechargeable Battery
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...