FLUKE VT04-ELEC-KIT User Manual for the Fluke VT04-ELEC-KIT Visual IR Thermometer Electrical Combo Kit

Loading ...

Visual IR Thermometer

Power On and Off

To turn on the Product, push and hold  for 2 seconds. A start-up screen

shows on the display and an indicator bar shows the status, see Figure 1. The

indication bar increases on power up and decreases on power down. After the

start-up screen, the Product is ready to use. To turn off the Product, push and

hold  for 2 seconds.

The Auto Off feature turns off the Product after 10 minutes of inactivity.

VT02 VT04

hak03.eps

Figure 1. Start-Up Screen and Status Indicator

For the first time use, or when the batteries are removed for more than a few

hours, the Date and Time menu opens. See page 18 for more information about

how to set the date and time.

Note

All visual IR thermometers need sufficient warm-up time for the most

accurate temperature measurements. This time can often vary by

model and by environmental conditions. Although most visual IR

thermometers are fully warmed up in 3 to 5 minutes, it is always best

to wait a minimum of 10 minutes if the most accurate temperature

measurement is very important to your application. When you move a

visual IR thermometer between environments with large differences in

ambient temperature, more adjustment time can be required.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE VT04-ELEC-KIT Visual IR Thermometer Electrical Combo Kit