Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
719User Manual 1335.5337.02 ─ 05
WGENerator<wg>:COUPling:PHASeshift <PhaseShift>
Sets the phase shift between the waveform of Gen1 and Gen2 when the frequency
parameters of the two waveforms are coupled.
Suffix:
<wg>
.
1..2
Specifies the master generator.
Parameters:
<PhaseShift> Range: -180 to 180
Increment: 1
*RST: 0
Default unit: °
Usage: Asynchronous command
Manual operation: See "Phase Gen1 - Gen2" on page 373
WGENerator<wg>:COUPling[:FREQuency]
<CplFreq>
Enables the coupling of all frequency parameters of the generators.
Suffix:
<wg>
.
1..2
Specifies the master generator.
Parameters:
<CplFreq> ON | OFF
*RST: OFF
Usage: Asynchronous command
Manual operation: See "Amplitude parameters" on page 373
GENerator:SYNC[:COMBination] <Combination>
Sets which signals generated from the waveform generator are synchronized.
Parameters:
<Combination> NONE | GEN12
*RST: NONE
Usage: Asynchronous command
Manual operation: See "Synchron start" on page 372
17.19 Status reporting
This chapter describes the remote commands that are used to read the status regis-
ters.
Status reporting
Loading ...
Loading ...
Loading ...