Loading ...
Loading ...
Loading ...
not, adjust the camera according to the figure below
to get an optimum angle.
Pan Position
[0° to 360°]
Rotation Position
[0° to 360°]
Tilt Position
[0° to 75°]
Figure 2-10 3-Axis Adjustment
2.2.2 Ceiling/Wall Mounting with Junction Box
Before you start:
You need to purchase a junction box in advance.
1. Paste the drill template on the ceiling/wall.
2. Drill screw holes and the cable hole according to the
drill template.
Figure 2-11 Drill Template
3. Take apart the junction box, and align the screw
holes of the mounting base with those on the
Junction box’s cover.
4. Install the mounting base to the junction box’s cover
with two M4 × 10 screws.
Figure 2-12 Install the Mounting Base
5. Secure the junction box’s body on the ceiling with
four PA4 × 25 screws and expansion bolts.
Figure 2-13 Secure the Junction Box on the Ceiling
6. Route the cables through the bottom cable hole, or
the side cable hole of the junction box.
7. Combine the junction box cover with its body.
Loading ...
Loading ...
Loading ...