Loading ...
Loading ...
Loading ...
Figure 2-14 Combine the Junction Box’s Cover and Body
8. Repeat the step 5 to 7 of 2.2.1 Ceiling/Wall
Mounting without Junction Box to finish the
installation.
2.3 Installation of Type III Camera
2.3.1 Ceiling/Wall Mounting without Junction Box
Before you start:
The installation of ceiling mounting and wall mounting
are similar. Following takes ceiling mounting as an
example.
Note:
For installation with junction box refers to 2.2.2
Ceiling/Wall Mounting with Junction Box.
1. Disassemble the turret camera by loosening the
screw.
2. Remove the mounting base from the main body.
Figure 2-15 Remove the Mounting Base
3. Drill the screw holes and the cable hole (optional)
on the ceiling.
4. Secure the mounting base to the ceiling with
supplied screws.
Figure 2-16 Secure the Mounting Base to the Ceiling
5. Route the cables through the cable hole, or the side
opening.
6. Secure the camera on the mounting base.
1) Pull out the clip plate, and then to combine
the camera with the mounting base.
2) Push the clip plate in, and secure the camera
by tightening the screw.
Loading ...
Loading ...
Loading ...