Loading ...
Loading ...
Loading ...
19
Installation
Attaching the Stand
5
Check that the stand neck is
rmly connected.
- Caution
Do not press down on the monitor. There is a risk
of damaging the monitor.
Fasten the connection part onto the screen
with two screws.
4
Before assembling the product, place the product down on a at and stable surface so that the screen is facing downwards.
a no nehw tcudorp eht no erusserp gnicalP .devruc si tcudorp ehT : at surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
The exterior may differ depending on the product.
3
Tightly fasten the connecting screw at
the bottom of the stand base.
1
2
Insert the stand neck into the stand base in the
direction shown in the
gure.
Hold the main body of the product with your hand
as shown by the
gure. Push the assembled stand
into the main body in the direction of the arrow as
shown in the gure.
Place the protective Styrofoam (cushion) included
in the package on the floor and place the product
facing down on the Styrofoam, as shown in the image.
If Styrofoam is unavailable, use a thick sitting mat.
Loading ...
Loading ...
Loading ...