Loading ...
Loading ...
Loading ...
- 20 -
Always follow all safety precautions when performing maintenance to the PowerMate
®
.
WARNING
Electrical Shock or Personal Injury Hazard
Always turn off and unplug vacuum cleaner before performing maintenance to the
vacuum cleaner. Failure to do so could result in electrical shock or personal injury from
vacuum cleaner suddenly starting.
TO REMOVE BELT
1. Press handle release pedal and lower the
swivel. Turn PowerMate
®
upside down
and remove the four (4) screws securing
base to PowerMate
®
cover.
2. Turn PowerMate
®
right side up. Loosen
the rear and side latches (A flat blade
screwdriver may be required).
3. Grasp cover by rear and pull up to
remove it from base.
4. Lift brushroll assembly out and remove
worn belt.
5. Check and clean end cap areas.
See picture on page 21 for complete
brushroll assembly.
BELT CHANGING AND BRUSHROLL CLEANING
POWERMATE
®
CARE
Rear
Latch
Rear
Latch
Swivel
Side Latch
(Not Shown)
Handle
Release
Pedal
Side Latch
Brushroll
Loading ...
Loading ...
Loading ...