Loading ...
2
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
2
Set Up
3
Installation
Enrollment Preparation
Log in to the APP Store, download and install the App.
Power on the security control panel.
Log in the APP and tap the icon "+" . Scan the QR code or input the control panel serial No. to add the control panel.
In the APP, tap the "Enrollment Mode" button on the control panel page to make the control panel enter the enrollment status.
1
Enroll the Peripheral Locally
2
Enroll the Peripheral with QR and serial No.
In the APP, tap the icon "+"and scan the QR code or serial No. on the peripheral.
1. Enrollment
2. Adjust the knob to the unlock icon.
1. Adjust H or L mode according to the mounting height.
H Model: 2.5 to 3 m (typical 2.7 m)
L Model: 0.8 to 1.2 m (typical 1 m)
2. Check Signal Strength
Solid Green for 3 s - Strong Signal
Solid Orange for 3 s - Medium Signal
Solid Red for 3 s - Weak Signal
Flash Red for 6 times - Lost Signal
3. Slide the middle frame downward to seperate the middle frame and the rear panel.
3. Press the button to remove the rear panel and the middle frame.
4. Adjust the power switch to ON.
Enrollment succeeded: Flash green for 7 times.
xxxx
Device
1
3
2
4
Signal Strength Test
1 2 3
Loading ...
Loading ...
Loading ...