Loading ...
Loading ...
Loading ...
Display Menus
System Menu
3
3-47
Note
After the system settings are made for your
individual requirements, Fluke recommends
saving the settings in a user configuration.
Display Submenu
The "Display" submenu can be used to select the display
settings for the thermal imager. In the standard
configuration (factory settings) the display is switched
from the display to the viewfinder when the display is
folded to the camera housing (active display: automatic).
However, you can make either Display or viewfinder
(Finder) as the active display element.
hvh246.jpg
The brightness values of display and viewfinder can be
set independently using the levels "Bright", "Medium",
and "Dimmed". When the ambient lighting conditions are
"normal", the brightness setting "Medium" is absolutely
sufficient for the display. In dark conditions, the setting
"Dimmed" should be selected.
The DVI-D output can also be set, with the formats 768p
and 800p being the available selection options.
Regarding the FBAS interface (TV output), it is possible
to toggle between the standards PAL and NTSC.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct
.com
Loading ...
Loading ...
Loading ...