Loading ...
Loading ...
Loading ...
- 34 -
NOISE/SOUND
How long will the
soothing sound be played
by the baby unit?
Once you select a soothing sound, it will be continuously repeated for
approximately 15 minutes. In case you want to play all lullabies that are
available, select All lullabies.
How can I increase the
volume of the soothing
sound?
You can adjust the volume of the soothing sound on the parent unit, not
on the baby unit� Press the soothing sound button on the parent unit to
open the soothing sound menu and adjust the volume�
OPERATING TIME / RANGE
Question Answer
Why does my baby
monitor manage a much
smaller distance than
specied in this user
manual?
The specied operating range of 300 meters /985 feet is only valid
outdoors in open air and in the line of sight� Depending on the
surroundings and other disturbing factors, the operating range may be
smaller (see the table in chapter ‘Positioning the baby monitor’)�
Inside your house, the operating range is up to 50 meters/165 feet,
which is also limited by the number and type of walls and/or ceilings
between the parent unit and the baby unit�
The operating time of the
parent unit is supposed
to be up to12hours. Why
is the operating time of
my parent unit shorter?
The video brightness of the parent unit may be set too high, which
causes the parent unit to consume a lot of energy� Decrease the
brightness of the parent unit�
The parent unit consumes a lot of energy when the video display is
switched on continuously. Activate the Audio, Vox or Eco mode in the
parent unit's menu to increase the operating time (see chapter ‘Features’,
sections 'Audio mode', ‘Vox mode' or ' Eco mode' ).
The volume of the parent unit may be set too high, which causes the
parent unit to consume a lot of energy� Decrease the volume of the
parent unit�
As any other rechargeable electronic device, the battery capacity
decreases after a long period of usage�
VIDEO DISPLAY
Question Answer
Why do I get interference
on the parent unit? Why
does the video display on
the parent unit icker?
Interference may occur when the parent unit is out of range of the baby
unit� Interference may also occur if there are too many walls or ceilings
between the parent unit and the baby unit or when other 2.4 GHz
wireless devices are switched on (e.g. microwave, Wi-Fi router).
Perhaps you have more than 2 sets of baby monitors and interference
may occur. Keep these 2 baby units away from each other, ideally in
separate rooms�
Put the parent unit in a dierent place, closer to the baby unit, or switch
o other wireless devices.
The rechargeable battery of the parent unit may need to be charged�
Loading ...
Loading ...
Loading ...