Loading ...
Loading ...
Loading ...
21
AUTOMATIC WATER DISPENSER
The Internal water dispenser is mounted
inside the cabinet, along the left-hand
cabinet wall.
Before using the water dispenser for the
first time or after changing the water filter,
you must prime your water supply system.
Place a cup against the paddle and press
to dispense water.
Priming the water supply system
Using the dispenser after installation:
If you do not flush the system, the first
glass of water may be discolored or have
an odd flavor.
1. Before dispensing, please ensure
you enable Water Dispenser on the
appliance control display (LEDs
above the button are illuminated).
2. Begin filling the system by pressing
and holding a drinking glass against
the water dispenser paddle.
3. Keep the glass in this position
until the water comes out of
the dispenser. It may take up
to 4 minutes to purge air from
the system.
4. Continue dispensing at least 1 full
gallon (3.78 L) of water, stopping to
empty the glass as necessary.
If the water dispenser function becomes
disabled, enable the water dispenser by
pressing and holding Water Dispenser on
the appliance control display. When the
water dispenser is turned on, the LEDs
above Water Dispenser are illuminated.
NOTE
If you prefer to keep the internal
water dispenser disabled, use the
appliance control display to disable it.
The LEDs will not be illuminated above
Water Dispenser.
CAUTION
For proper dispenser operation, the
recommended water supply pressure
should fall between 30 psi and 100
psi. Excessive pressure may cause the
system to malfunction.
Water Dispenser
On
Water Dispenser
O
Loading ...
Loading ...
Loading ...