Loading ...
Loading ...
Loading ...
17
WATER SUPPLY CONNECTION
To Connect the Water Tube to
the Household Water Supply
1. Disconnect the refrigerator from
the electrical
power source.
2. Place the end of
the water supply
line into a sink or
a bucket. Turn ON
the water supply
and flush the
supply line until
water is clear. Turn
OFF the water
supply at the
shuto valve.
3. Open the locking
clips and grab
the water line
coming from
the refrigerator.
Remove the plastic
cap from the water
inlet fitting and
discard the cap.
4. If you are using stainless steel
braided tubing (recommended)
- the nut and ferrule are already
assembled on the tubing. Slide the
compression nut onto the water inlet
fitting and finger tighten.
To
household
water
supply
To
unit
water valve
Place ½" wrench
here. Do not turn.
Place ½" wrench
here. Turn
clockwise.
5. Using two ½ in. wrenches (one to
hold the household water line nut
and the other to hold the water inlet
fitting nut), tighten a half turn with a
wrench. DO NOT overtighten.
6. Replace the connected tubes into
the clips and lock the clips back
in place to keep the tubing in the
right position.
7. Turn ON the water supply at the
shuto valve and tighten any
connections that leak.
8. Reconnect the refrigerator to the
electrical power source.
9. Ensure the ice maker is turned ON.
10. Purge air from the ice and water
dispenser system by operating the
water dispenser for 3-4 minutes.
This will require dispensing several
glasses of water.
Loading ...
Loading ...
Loading ...