Loading ...
Loading ...
Loading ...
Enable/disable Child lock
Factory resetFilter reset
Long press On/Standby button for
about 5 seconds (until all the LEDs
of the interface light up and blink
once). Then release.
When the Child lock is on the air
purifier will continue to operate
but the speed/mode button will be
locked.
Change brightness
Press the Fan Speed button and On/
Standby button at the same time.
Hold for three seconds.
Then, keep holding your finger on the
On/Standby button and tap the Fan
Speed button with the other finger to
adjust brightness.
If the brightness is on the lowest level,
then it will increase by one level. If the
brightness is on the highest level, then
it will decrease by one level.
5 seconds
30 seconds
15 seconds
Extra long press On/Stanby button
for about 30 seconds (until all the
LEDs of the interface light up for
the second time and blink four
times). Then release.
After factory reset, the air purifier
restarts with default configuration
will go into Standby mode.
Extra long press Fan Speed button for
about 15 seconds (until all the LEDs of
the interface light up for the second
time and blink once). Then release.
After replacing the filter, it is required
to manually conduct filter reset on
the appliance. If done correctly, the
red filter replacement indicator will
blink three times and then disappear.
How to use tips
Step 1
Step 2
Loading ...
Loading ...
Loading ...